My pardon, I thought that was what we were talking about.
As the fictional character Emily Latella would say: "Never mind."
-Chuck Harris, WA3UQV
On Tue, 1 Apr 2025 19:56:03 -0700 "Paul - AI7JR via groups.io"
<paul.hanchett@...> wrote:
Chuck--
If I understand correctly, it's only the QMX+ that gets powered up,
firmware loaded, and tested... On Apr 1, 2025, 19:47 -0700, Chuck
Harris via groups.io <cfharris@...>, wrote:
A really good question that you should ask yourself is:
Does your radio work when you power it up?
They all come with firmware installed for the factory
tests of the SMT parts on the board, so if your radio
is assembled correctly, it should play.
If it doesn't, concentrate on that. Save the firmware
loading for after you have fixed any construction errors.
-Chuck Harris, WA3UQV
Tue, 01 Apr 2025 18:22:27 -0700 "Bill KJ5IVB via groups.io"
<Wdbuck@...> wrote:
Just finished QMX build and I can’t get my Mac to recognize the
USB so as to upload firmware. ?I am powering with a 7v power
supply. ?I am using USB c to usbA and then an adapter. ?Have
tried two other cables with no success. ? I have seen all the
tips on YouTube and also page 63 in the manual. ?Feel like I’ve
wasted $150 on this radio and likely never to get it to work. ?I
will try on a Windows machine if I can borrow one this week.
Other than that don’t know what to do.
Bill, KJ5IVB
