Hi Alan,
Well, I thought I had the ProgRock2 programmed for the 6.6khz frequency, installed it with the two pins of a HC6 crystal base with a backside ground terminal soldered to the holder base. I plugged it into the equipment and it seemed to work for a few minutes then stopped. I’m not sure why but I’ll set up another unit for another frequency and see if it does the same thing. It may be something in the equipment oscillator circuitry killing the PR2 (maybe a voltage issue), so I’ll check that and see. It seems strange that the unit would work for a minute or two before dying.
Thanks again for your help!
Tom N5AMA
toggle quoted message
Show quoted text
On Mar 31, 2025, at 8:56?AM, Alan G4ZFQ via groups.io <alan4alan@...> wrote:
?On 31/03/2025 13:01, Tom Smith via groups.io wrote:
The online instructions appear to be using a Linux app that I can’t find on my Windows computer.
Tom,
The Windows version
is identical except that you enter a COM port number seen in Device Manager when you plug in the Progrock..
The instructions in the manual should be enough, or ask for any obscure detail.
73 Alan G4ZFQ
