Chuck--
?
If I understand correctly, it's only the QMX+ that gets powered up, firmware loaded, and tested...
On Apr 1, 2025, 19:47 -0700, Chuck Harris via groups.io <cfharris@...>, wrote:
A really good question that you should ask yourself is:
Does your radio work when you power it up?
They all come with firmware installed for the factory
tests of the SMT parts on the board, so if your radio
is assembled correctly, it should play.
If it doesn't, concentrate on that. Save the firmware
loading for after you have fixed any construction errors.
-Chuck Harris, WA3UQV
Tue, 01 Apr 2025 18:22:27 -0700 "Bill KJ5IVB via groups.io"
<Wdbuck@...> wrote:
Just finished QMX build and I can’t get my Mac to recognize the USB
so as to upload firmware. ?I am powering with a 7v power supply. ?I
am using USB c to usbA and then an adapter. ?Have tried two other
cables with no success. ? I have seen all the tips on YouTube and
also page 63 in the manual. ?Feel like I’ve wasted $150 on this radio
and likely never to get it to work. ?I will try on a Windows machine
if I can borrow one this week. ?Other than that don’t know what to do.
Bill, KJ5IVB
Paul - AI7JR