Question for Hans,
?
Have you seen anything like the spectrum I (and Jim) posted?? During my regular weekly QSO with a friend about 170 miles away, while he was able to copy me and it did not sound bad (still trying to get the sound bite he recorded of my transmission), he was able to corroborate that I was producing RF up and down from my Fc that he could see on his SDR SW (he runs PowerSDR).
?
I am going to try a couple of different mic's (QRP Guys and Adam Kimmerly's which are on the way to me) and redo calibration but wondering if the issue will persist.? I tried using both a (connector modified) Icom HM-12 and a Behringer XM-8500 with poor results (as spectrum pic I posted previously shows).
?
Also, no one replied regarding calibration with or without a mic plugged in.? From the beta page one might infer that with a mic plugged in would be correct as the calibration section follows the mic drive setup section.? It is not explicitly stated and wanted to ask to be sure.? So, mic or no mic during calibration (or does it even matter)?
?
Thanks and 73,
?
Robert, WA2T
