>>>>I see 20v and 50v ratings...and I<<<
?
The 20V is a hard limit gt gate brakdown votlage.? ?The 50V is the peak voltage
the drain can see in operation before the internal silicone goes back to sand.
?
The device was specifically designedd for 12V nominal? use.? To do that you
need margins as peak RF van easily exceed 3X 12V and 4X unders poor swr
is not unlikely,
?
The IRF510 is a 100V device...
?
?
--
Allison
------------------
Post online only,?
direct email will go to a bit bucket.
