1. Practice mode does not make sense in SSB I guess. When enabled in CW Keyer menu and SSB mode is selected it could be temporarily disabled and then when CW is selected again it could be automatically re-enabled.
I agree but I think this his already the case isn't it? Doesn't SSB ignore practice mode?
2. Displaying CW decoder text in SSB (in fact also in DIGI) does not make sense and looks rather disturbing. I suggest CW decoder part of the screen could be automatically cleared when SSB/Digi mode is selected or perhaps re-used to some other purposes in these modes. Mic input level would make sense in SSB.
Yes agreed, I will check this.?
3. Short press of left button bring up keyer speed in SSB. Does not make much sense
Will fix...
4. After copying the firmware file my QMX did not reboot itself. All is ok after recycling the power.
Yes I am updating with each firmware release, two QMX+ here. One of them when I put it into firmware update mode, needs the ON button pressed again to make it come up as a drive (on the Pi400); when I copy the new firmware in, it automatically boots up when it's finished installing.?
The other QMX+, goes into firmware update mode immediately you ask it to... And boots up as soon as firmware finishes copying in.?
So... Indeed some variance in behavior, and I don't (yet?) know why this is. But I don't believe this is a new thing pertaining to this particular firmware release. And cycling the power always seems to fix everything.?
