Will the 9V QMX+ receiver accept 14.75V or will it break?
I ask this question in another thread "QMX+ dev-board" in which I explain that I want to install a bank of 4 LiFePO4 batteries on the dev-board and they receive 14.75V from the charger. Obviously the PA will be protected by the settings "5.17 Protection menu" - "Protection voltage" set to "Prevent Tx", "Min Voltage" set to 7 and "Max voltage" set to 10. Usually the QMX+ will be "OFF" when the 14.75V charger is plugged in the DC socket in order to avoid applying this 14.75V to the components but I wonder if in case the QMX+ is "ON" there might be a danger for the receiver section?
73 - Pierre - FK8IH
Pierre - FK8IH