On Mon, Jan 13, 2025 at 05:17 PM, ta2rx bekir wrote:
... tried updating the firmware, although not necessary, to see if the PC-rig connection is working. QMX+ was connected as an external device without any problem. To cancel the whole thing, I turned the rig off. ...? So I pressed the button again to make sure it is off. When I disconnected the USB cable the PC binged to warn me that an external device was disconnected. That meant the rig was still on and in firmware update mode.
From the operational manual:
In the firmware update mode, the LCD backlight is OFF,
nothing is displayed on the LCD, and none of the buttons
or controls or connections are operational,
There is no way to switch off from firmware update mode by using the encoder button.
So, I have got a feeling the problem is with the QMX+ On/Off button not responding to Mode and Band change clicks.
If you are able to switch off by long pressing the encoder button than the hardware should be ok. Click, double click and long press are going the same way to the controller.
?
73 Ludwig
?
