I completed a QMX+ last week and the output powers are very similar to yours as you can see below. Measured power is from an external power meter and reported power is from the diagnostic menu on the rig.
One thing I noted was that the 10m output using the diagnostic tab is lower (and the power meter confirms) than that measured just keying the rig, I'm not sure if that is a feature or a setting I've messed up somewhere.
?
| QMX+ Measurements |
12V |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
| Freqy (MHz) |
1.8 |
2 |
3.5 |
4 |
5.332 |
5.405 |
7 |
7.3 |
10.1 |
10.15 |
14 |
14.35 |
18.068 |
18.168 |
21 |
21.45 |
24.89 |
24.99 |
28 |
29.7 |
50 |
54 |
| Power Measured (W) |
6 |
6 |
4.8 |
4.6 |
4.8 |
4.8 |
4.8 |
4.8 |
5.5 |
5.5 |
3.8 |
3.5 |
3 |
3 |
5.2 |
5.2 |
3.5 |
3.5 |
4 |
4 |
2 |
2 |
| ? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
? |
| Current (A) |
0.95 |
0.95 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.75 |
0.75 |
0.5 |
0.5 |
0.75 |
0.75 |
0.9 |
0.9 |
1 |
1 |
0.7 |
0.7 |
0.6 |
0.6 |
| VSWR |
? |
1 |
? |
1 |
? |
1 |
? |
1 |
? |
1 |
? |
1.1 |
? |
1.1 |
? |
1.1 |
? |
1.1 |
? |
1.2 |
1.25 |
? |
| Reported Power |
? |
5.8 |
? |
4.3 |
? |
4.2 |
? |
4 |
? |
5.1 |
? |
3.3 |
? |
2.9 |
? |
4.4 |
? |
3.2 |
? |
1.2 |
2.3 |
? |
| Volts TX |
? |
9.8 |
? |
9.8 |
? |
9.8 |
? |
9.8 |
? |
9.8 |
? |
9.8 |
? |
9.8 |
? |
9.8 |
? |
9.8 |
? |
9.8 |
9.8 |
? |
--
G0TXL (Paul)
