These settings worked for me using a PC.
?
Start N1MM Logger+, click on Config Tab, click on “Configure Ports, Mode Control, Winkey etc...”
?
N1MM Configurer Hardware Tab:
?
For QMX:
Port: COM# (determined with Windows Device Manager)[Start Device Manager BEFORE connecting QMX]
Radio: TS-480
Set: 9600 Baud, Parity = N, Databits = 8, Stopbits = 1, DTR = Always On,
RTS = Always On
?
For WinKeyer:
Port: COM# (determined with Windows Device Manager)[Start Device Manager BEFORE connecting WinKeyer]
Radio: NONE
CW/Other: Check box
Set: DTR = Always On, RTS = Always Off
?
N1MM Configurer WinKeyer Tab:
?
Keying Mode: Your choice
Winkey 5 Pin Function: PTT
Sidetone Frequency: Your choice
Winkey 2/3 – Check box
Winkey Speed Pot Control: I checked Use Winkey Speed Pot
Other boxes were default
