The QLG3 instructions were included with the QMX+ assembly manual. Don't forget the jumper on the main PCB and be sure to insulate it!?
On Mon, Sep 9, 2024 at 11:32 AM, Mike KK7ER
<groupio@...> wrote:
I finished my QMX+ build last night and sweeps look pretty good (some power tweaking still needed) and made a few contacts.
After building a couple QCX minis and QMX, the space inside the QMX+ feels quite luxurious!
?
I could not find any assembly or operation instructions for the QLG3!
Since it seemed pretty obvious, I went ahead and built and installed it anyway.
It appears to be alive but not working properly.
I enabled internal QMX+ GPS in the configuration menu.
When using GPS viewer through serial terminal, I see an occasional "PPS" in the upper right corner but no other output.
I took it outside on the porch, set the antenna on top of a metal porch railing, and left it for 15 minutes.
Then going to the GPS viewer, I saw "No Data" followed by a heart icon.
After exiting and returning to the GPS viewer, I see "No Data" followed by a "!".
No other GPS viewer sub-menus have any data displayed.
?
Is there a QLG3 manual anywhere?
?
73, Mike KK7ER
?
