On Wed, Aug 28, 2024 at 10:39 AM, ajparent1/kb1gmx wrote:
The sweep is inconclusive as the scale is unclear.? if its HZ then opposing
sideband is bonkers.? IF it Khz something else is going on.? The manual
is unclear as to what that screen shows.
?
I thought the manual was pretty clear this was khz? From the 1.10 manual: "In order to be able to visualize and measure the image rejection, firmware 1_05 introduced the
¡°Image sweep¡± screen, which sets the VFO to the band center frequency as defined in the Band Configuration screen, then sweeps the signal generator input from -30.5kHz (below) to +7kHz (above). "
?
-Nate
N8BTR
