Howard, this microphone won't work. You need the standard 2-terminal element. The?+ side of that element goes to the Ring (Mic). The - side of it goes to Sleeve (Gnd). A push button PTT switch ?connects one terminal to GND and one terminal to tip (PTT). All cottages?and coupling capacitors and preamps are built into the QMX... Good luck .. 73 .. Ron
On Sun, Aug 18, 2024 at 12:06?PM Howard Lamhut via <Howardlam=
[email protected]> wrote:
When SSB is implemented on the QMX I want to be ready.
I have a vintage in new condition RadioShack electric condenser microphone element.
on the illustration for the mic I believe the middle wire which is number 2 would need a momentary switch for PTT, or would it be better to put it on #3 ground?
?I imagine as per the schematic that came with the microphone it will need a capacitor in the range specified.
Any help here would be appreciated because I don¡¯t want to take a chance at wiring something wrong and damaging anything.
Feel free to draw a full schematic just to confirm everything.
thank you everyone.
?
Ronald Taylor