Getting the port talking on a RPi 5 is the easy bit
Its /dev/ttyACM0
Make sure you put this in the PTT Method box too.
However
1 the Transmit audio source remains enabled meaning that it is not looking at the QDX as an audio source etc..
I also cannot get the Test CAT button to go Green.
The transmit button does however go red and enables the PTT.
As there is no audio you will see no power output.
?
?
Still not found a fix for this with Rpi5
?
If u open a terminal and type sudo putty
This opens a putty window
Go serial and enter /dev/ttyACM0
?
This opens up the QDX terminal with no problem and it can be controlled.
?
It seems WSJT-X is not yet functioning on a RPi 5
?
I might try running Win 11 on pi 5 and trying that
?
73
?
Nick
?
