-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Thank you!
re:
Regarding the second point voltage at "+12V" should come up after PWR_ON goes down
I will double check this tonight & report back.
Regards!
~Gordon
Sent with Proton Mail secure email.
On Tuesday, July 16th, 2024 at 3:37 AM, DH8WN@... <DH8WN@...> wrote:
On Tue, Jul 16, 2024 at 01:46 AM, Gordon Young wrote:
so far I get
- correct BAT_LEVEL value
- PWR_ON pulled down when left encoder depressed
no 3.3 volts present at ?LIN_REG_EN
when depressing the left rotary encoder the voltage at LIN_REG_EN goes to .75 3/4 of a volt but never 3.3 regardless of BATT input voltage.
Gordon,
please follow the description in the Wiki document. Regarding the second point voltage at "+12V" should come up after PWR_ON goes down. Without this voltage nothing will work.
Did you solder both sides of the female pin header to the SMPS subboards?
73, Ludwig
-----BEGIN PGP SIGNATURE-----
Version: ProtonMail
wsBzBAEBCAAnBYJmlpSkCZCprHln++gNbRYhBKox1cIWJXyQqtutQamseWf7
6A1tAAAlUgf8DqXkF2Piq4Cl8ve0+WcWXWO3QocJ10VbjJq900KwOq5FrCou
ieGxFaXOcz4mFhLPHTcxxJhFt866mrNFOqoJtp9IHiDNy5tIXAzlBqEBnE6u
EJP0imhFaQi84LD+urWdlRTkHzspRtDNf+gBUmv9YzrTSZGQnXtldtkTaYvf
9Az5pxUg++R8VXP+V4/agQl/1shq+9sz+p0zyt/9oRJkwCPuHCym8Q7zkStA
AtDNsluFHI7Xvw/bBuI2Kltoq97xKGaBShZe3dljfAEGRcnUIANbgOXGM4dI
u/SxkgCegJBjyz/jJyRH4VTStSqmH/RO9OQHBTedFblHPLfySdHR1A==
=gA9n
-----END PGP SIGNATURE-----
Gordon Young