Hey all, I built a 12v high band version running 1_00_017 on a rev 3 board this week.? For the most part, I have been making contacts and enjoying this radio quite a bit.?? I disabled transmit on 11m for now.?
I noticed that if I run an SWR sweep on 11m while disabled it it produces some odd graph results, and those results then continue on other bands.? If I shut down the QMX and avoid SWR graphs on 11m, all the rest graph as expected if not a little high on the upper bands.
It also seems that if AGC is on, and you run an audio sweep that the results are not as expected.? AGC has to be off and the QMX reset to get anticipated AF sweep results.
Image sweep on 20, almost always produces a strange result on the first run, but on subsequent runs looks as expected.
RF sweeps, do not seem to peak except on 11m and 10m... and I am not sure if this is my build, or as expected.? I get mixed results on 10m also.?? I have included some attachments, and would appreciate some thoughts if this is just my build or as expected, or some firmware hic-ups!
Thanks!
