Hi Dick
AFAIK the Windows device name is not /dev/ACM... That is the
Linux device name. It will probably be something like com5.
The lack of any device hotplug appearing in the device manager
would appear to be the giveaway though. ie some kind of USB
related fault. Sorry I am not a Windows user so don't know how it
acts.
Cheers Bob VK2YQA
On 16/3/24 05:51, Dick Bingham wrote:
toggle quoted message
Show quoted text
I just restored power to my QDX and it has as problem/s
I am using? DELL E6510 laptop running Win-7 SW and?
using WSJT-X v2.6.1 SW
1 - When Power is added to the QDX it flashes normally maybe
15-times before a solid red light appears.
2 - WSJT-X is activated and under RIG: QRPLabs QCX/QDX is
selected, PTT Method ===> CAT, Mode ===>
? ? ?Data/Pkt
3 - Audio-tab ===> Input: Digital Audio Interface (2-QDX) and
Output:? Digital Audio Interface (2-QDX)
? ? ?are selected
4 - When TEST CAT is pressed, there is no GREEN and an error
window appears along with a WSJT-X message
? ? ?asking to reconfigure
5 - I can set the WSJT-X to 20-meters to match the band I want the
QDX to run and see FT8 decodes being
? ? ?displayed on-screen with the "Frequency window" highlighted
in solid RED displaying 0.000 000
6- Looking at the Win-7 Device Manager display I can plug/unplug
the USB connector and NOT see the QDX appear? ? ? or disappear
- Using PUTTY, serial and entering /dev/ttyACM0 or /dev/ttyACM1
does not connect to the QDX
This unit use to work! Any ideas why even PUTTY does not access
this unit ?
Dick/w7wkr back at CN98pi
