The QDX-M firmware displays only a single entry in the Band Configuration screen. The single entry is configured automatically by the firmware for the band you choose to build the kit for, controlled by your choice of jumper wires (install following the instructions in the assembly manual).?
If one is to build a QDX-M for a band lower than 20m how should they set up the jumpers? Or does it not matter, as you can change it all in the band configuration in the Terminal program? (I'm thinking 160M, which I know the band name needs to be 160 to get the receiving set up properly.?
The firmware doesn't have defaults set up yet for all those other bands. So you would need to set up the band you want, manually, in the terminal.?
