Yes Willy, I noticed this or something very similar. When double clicking? for preset whilst on 20m and selecting i.e 10m and pressing preset, the display would change to 10m but the audio was still on 20m.
?
73
?
Ian G4GIR
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 19/02/2024 17:42:05
Subject: [QRPLabs] QMX (frequency) presets not working properly / maybe "dangerous"
Hello QMX users,
this is not new to version 17, but was not of high importance (to me), so I did not mention earlier...
When recalling preset frequencies (e.g. you are on 20m and recall a frequency in the 80m band),
something goes wrong: No change in background noise, no reception on the intended frequency.
If you transmit, either the LPF filters seem to be set wrongly, or the frequency is far-off.
High current drain and no output power on 80m (and no SWR protection kicking in).?
When the QMX returns to RX, a persistent strange sound is heard.
In this state a regular band change (double-press on the volume knob) brings the QMX again to normal working order.
As I said, not that important (the QMX has great value as it is now), but did anyone else notice?
73 de oe1wyc+oe3wyc, Willy
?
