I replaced the L4 toroid with a T37-6 as Giuseppe suggested. I also changed the windings on L1, L3 to turns, and L2 to 11 turns and that resulted in getting about 1.5 watts RF out. But when I then went to the Alignment menu 8.7- Peak BPF, I hear the tone and see the number 3 in the upper right and there is no change when I adjusted C1. My T1 winding are 3-3-3-20, I have tried reducing the large windings to 18 but the number in Peak BPF goes down to 2 and is still unchanged when I adjust C1.?
I'm not sure what part of the circuit I can try to change to get the BPF Peak to respond. Any suggestions would be much appreciated.?
