开云体育

Can you tell if the 3V3 linear regulator is coming up? If it's not, then the MPU won't come up and turn on power hold.

I built a QMX low band in the summer with no issues. So, I bought a high band kit for Christmas and after building it, I see nothing. No bootloader, no start, nothing on the display. Comparing the two, on the second build, there is nothing at all on the 3.3V rail, it draws about 8.5mA while pressing the left encoder to power up, then nothing when I release the button. Unwisely maybe, I tried substituting all the individual boards from the new build into the earlier main board, and everything works there, so it must be some sort of fault on the new main board. I can't see anyone else with this issue on the forum, has anyone else seen this? Advice welcomed, at the moment it's sitting there useless!

George, M0HLP

-- 
Paul -- AI7JR