Re: QMX Shipped, panic stage

Re: QMX Shipped, panic stage

#qmx

David Wilcox K8WPE All Messages By This Member #109150 开云体育 Billy, et al, If you are going to continue building kits like this you definitely need this:

There are cheaper versions elsewhere. I kept my two units when I retired from medical practice and use them daily for radio and other household repairs (and sliver removal too). ?The Donegan products are cheap when you figure how much you will use them. ?Radios and radio parts aren’t getting any larger these days. ?If you look around there was a useable unit a few years ago for less than $15. I bought one for my grandson and an extra one for me. ?Works better than Hans suggested jewelers loupe. Two eyes are better than two. ?

Also using your smartphone camera and enlarging the photo to look at certain areas in greater detail is also a use for an older smartphone….. I have the iPhone 12plus (larger screen) and the camera part is worth the cost of the phone to me at times looking for whiskers and other shorts….. did I say reading the little numbers on the small parts? ?I couldn’t build without it. ?

Dave K8WPE since 1960

David J. Wilcox’s iPad

Show quoted text

On Sep 1, 2023, at 7:35 AM, N5SE <bwmoore@...> wrote:

?
Karl, you sent this to the WRONG topic and guy. NOT ME! Checking all messages sent on groups.io, I found the original message as below. Not upset, trying to help both of you.

["Dire need of a part

David R Hassall WA5DJJ

Dear group,

While convalescing with all the ills I have acquired since July 4th, I decided to dig into my kit pile and spend the time building the neat kits that I had bought. ? While working on a QDX Rev 3, I was building along and noticed that L11 looked funny. ? It was broken in half. ? I may have done it or some shipper may have. ?I am not concerned with "who killed John". ? I just need a part. L11 is a SMD 47uh choke. ? I thought I had a "hanger queen" QDX but I think someone else got it when they need a part.

So I need an SMD 47uh choke for my QDX. ? Does anyone have a stock of them that would part with one or two? ? I will pay postage etc. as required.

and if you bought them I will pay for two. ?I just need the part and don't think that DigiKey ?would be happy for a order and the postage would not be pretty.

Thanks for the time and I hope I can come up with one of these so I can get my QDX running. ? Address is good in QRZ .

73 Dave WA5DJJ

SUPER GRABBER https://www.qsl.net/wa5djj/

?WEBSITE: ? "]

Send Dave WA5DJJ this information, I am sure he will appreciate it.

Thanks, Billy (N5SE)

From: [email protected] <[email protected]> on behalf of Karl via groups.io <karlshumaker@...>
Sent: Friday, September 1, 2023 06:10
To: [email protected] <[email protected]>
Subject: Re: [QRPLabs] QMX Shipped, panic stage #qmx
?

Have you checked this yet?
<Screenshot_20230901-060851_DuckDuckGo.jpg>

--
73
Karl
KI4ZUQ

--
N5SE
Billy Wayne Moore
7066 Shady Knoll Ln
Willis, TX 77318-6324
Phone: 936-537-2975???

开云体育

Re: QMX Shipped, panic stage #qmx

开云体育

Re: QMX Shipped, panic stage

#qmx