Is there some kind of log for QMX issues? Don't want to bore anybody by reporting what's known, or my build defect!
Here's what I'm seeing (I've got Firmware version 9 loaded, 7volts, 250ma current limit):
- On application of power, initial current is 0, but goes to around 10ma after 10-15 seconds. Stays steady after it comes up.
- On initial power application, power on click is ignored, until the above 10ma step in current.
- At that point, power on click "delays" for ~10sec, then display comes on and 150ma current draw.
- Tune knob frequency only goes up?
- Long press power click displays Shutdown, but LCD never goes off, current (150ma) never drops.
- While "Shutdown" is displayed, band and mode can be changed!
- Going back to 3, if the power is interrupted briefly (maybe 200mS), device turns off. Pressing power-on click activates immediately!
I what I'm seeing "normal" at the moment? :-)
Haven't gotten so far as to transmit or receive, either one. (Need to read that operations manual!)
Please forgive if this is the wrong place to put this!
73, Paul -- AI7JR
Paul - AI7JR