开云体育

If this goes through I would like to join. I have one open on the bench now and have a few questions. Thank you Dave Bohlen

I have the exact same problem in WSJT. It's impossible for me to actually carry on a QSO because it's constantly losing connection in cat. Changing bands is erratic. I'm really discouraged by the way

Rick, This is what I did: Ignore the Part 2 and Part 3 of the .tar files (GHTerminal). The normal programming software is called GHTerminal and doesn't need to be installed, just run the standalone

To the best of my knowledge, there is a software that Guohe gave us that can program all channel’s on the Q900/119. The software allows you to program the radio in all modes available on the radio.

Let's not get to overly excited here the internal tuner is functional, yes, however its ability to tune a decent ratio is not much. Test here if you're under a 2.4 or perhaps a 2.5:1 the tuner will

I need more time to test this. However, I found that using MSHV that did not have disconnects like I did with WSJTX and JTDx. I used MSHV for almost 3 hours and never once got it disconnect. Use the

Hello, I did a quick look through the group using DMR in the search filed. But didt find much I have a version 4 q900 with the DMR module, How do you even program this with the Q900? is there

Hey gang what is the best software for The Q900 controlling radio waterfall bandscope Thanks in advance 73

Hello I have a Q900 I bought on eBay What is the best software to control the rig? Thanks in advance K0SHF 73

I have a friend who noted the Q900’s poor mic quality. ?He opened up

If the GPS application on the radio shows correct latitude, longitude and altitude then you have good GPS signal. Sincerely, Brian

Thanks I have now connected an SMA antenna from a WiFi Router How do you check if any GPS signals are received? Cheers, m0wao

Since the Q900 has problem with modulation especially on FM, I looked for an amplified mic. The procomm mic that works well with, is not sold in Germany or many other countries. The mics I found where

I simply added an SMA antenna from an old home router. That did the job. The antenna is receiving signal only so it will be very easy to add. Sincerely, Brian

This looks to be an older manual or maybe the vendor hasn’t updated it. I was looking for the pin assignments for the Q900 mic, which says it has 3 poles on the plug, yep the plug has 4 poles.

I purchased a Quohetec Q900 v4 with all modules (GPS, DMR? and Compass). When I received it, it didn't have a GPS antenna. I contacted the seller and they responded that the Q900 with GPS module is

Not sure; CMP -> Compressor / Limiter?

When running FT-8 or JS8-Call, my CAT control periodically disconnects.? Usually a "retry" or toggling of IFG in the RF menu reconnects.? I'm pretty sure my Windows 11 laptop setup is good, and I'm

Nick, I added to your Chirp request the following blurb: "I also think this radio needs Chirp support. It is an all mode SDR that transmits from 1-74MHz with an internal tuner and 74-1.2GHz or

Can anyone explain the "CMP" control on the AF menu?? The manual's "MIC companing ratio" description doesn't help me much.? Any suggestions on its best setting for SSb voice and for FT-8?? Thanks