¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date   
In the Wild
Was driving South on 104 and saw a Red 928 driving North. Not sure if it is someone on this list or not. Not to often that I see another 928 on the road in the wild. In fact it has been a couple of decades in fat. Last one was in mid 2000's when I was at the Sharktober Fest. It was good to see one. David
Started by Scurry @
Original WSM Documents 8
Does anyone in the Portland area have the original WSM documents that they'd let me borrow, so as to make new and improved scans of the wiring diagrams? I know this is sort of a big ask, but I'm willing to put in the time to get everything scanned and into an OCR'ed pdf. Any help would be appreciated. Cheers, Glenn
Started by Glenn W. @ · Most recent @
Hooked On Driving at The Ridge Thursday 6/6/24
So sorry everyone - I meant to send this note Monday and did not get it sent. Update: There is hardly anyone signed up for this event. Looks like it may be a total of only 9 cars combined on the track for the B&C groups - which we are planning on running together - so it will be 30-minute sessions instead of 20-minute sessions every hour. If you are an "A" driver (not Solo approved) there may not be enough spots left, but try to sign up if you are able - we may not have enough Coaches for additional "A" students. It will be a great day - Partly cloudy, 74F - Perfect for the track. My #41 Stock Car will be on track - new Clutch & new tires (with only one session on them) so hope to be really turning it on and seeing how it goes. If you are able to be free tomorrow/Thursday 6/6/24 sign up & come out for a great day! If you just want to "check out" Hooked On Driving" (HOD), come out, find me, and I will get you a ride with a Coach to see what The Ridge Motorsports Park is like in Shelton, WA. Keith R. Martin 1980 5-speed LSD, S4 Brakes, Rear Hatch, S Front spoiler, Euro S Cams
Started by Keith Martin @
WTB some GT or similar cams 12
Hey local friends: I am looking for GT or similar profile cams to put into an S4 motor I am building. Does anyone have any that they are hoarding in their parts? -- 1992 Porsche 928 GTS Japan market https://benno928.wordpress.com/
Started by Michael Benno @ · Most recent @
Griots Garage Porsche Day (Sat June 1) 19
Caffeine and Gasoline Porsche day event at the Griots Garage store in Tacoma (S 38th St) this Saturday June 1. I'll try to be there unless it's a downpour. Forecast is showing some showers in the am, but it's early. Also supposed to be German Car day at ERTC but they will call it off if there's a 40% chance of showers forecast (they usually make the call on Thursday at some point). And a side note, Jeff Evans managed to get his 928 project (the one slated for a Maserati engine swap) into the showroom at Griots. So congrats Jeff and if folks are in the area, stop by and check it out. Griots Garage: 3333 S 38th St, Tacoma, WA 98409
Started by amidlman @ · Most recent @
1987 928 Engine available 153k miles $3k 2
Decided to do an engine swap on my 87 928, so the current engine is available, 153k miles. I believe it has GT cams in it, but I don't have any documentation to prove it. TB/WP was done in 2022. Come here it run and even drive it before it comes out. Car is at my mechanic up in the 7 Lakes area near Smoky Point. Price is $3k negotiable.
Started by Aaron McCreery @ · Most recent @
Hooked On Driving Shelton 5/17 & Portland 5/23
Hooked On Driving is it Shelton this Friday and at PIR in Portland next Thursday. You can still sign-up, or you can come out and watch for free at either event. Cars start on the track at 9 AM and except for lunch hour at noon, continue all day until 5 PM (4 PM at PIR/Portland). My Ground Pounder will be running. Trying to Figure out how to post a picture On the site for peoples' interest. Regards, Keith Martin 1980 Metallic Black 5-Spd PSD S spoiler S4 Wing & Brakes (retired from track)?
Started by Keith Martin @
PDX car show @ Grant HS 5/19
For those who may be interested, a family friend¡¯s son is organizing a car show(not Porsche specific fyi). It¡¯s a senior class fundraiser. Elliott is a 928 fan, grandfather has a mint 914 and Elliott is a voracious student of things Porsche. His first car/truck is a F150 but am sure he¡¯s the next gen of Pcar owner in the making. My dog Angus and I headed down from Seattle early Sunday. https://www.facebook.com/share/RYpLRdVpUmQnKx46/?mibextid=9l3rBW Non facebookers: https://docs.google.com/forms/d/e/1FAIpQLSd_UUMZWZ38soF3x2Sc1qECALViE71aD8nhaNd6czBrCQv31g/viewform?fbclid=IwZXh0bgNhZW0CMTEAAR0NxsFIoMHLLBEAndXo3v9QT9G_2GHM8fVg0NtJ-Q2knxWMCh9VMneFtmk_aem_Aa1m45tXGBN21WTeq07b2GVcWPUy1r-PJMK3wJOYEDT-FhoShV4myZCt1iBD0IxhfX4njxWPVHn9wwknSNyns72y $15/entry supporting Grant High School Senior Class 2024 Grant High School 2245 NE 36th St Portland OR 97212 Thanks for looking! -- Stefan Damstrom 1988 928 S4 Venetian Blue / Champagne 5 spd 2004 Carrera 4S Cabriolet Arctic Silver/Black Bellevue
Started by Stefan Damstrom @
1979 & 1980 On PCarMarket 2
Has everyone seen the two 928's on PCarMarket this week? Only 1-2 days left on each. The 1980 has Phone Dials (15" however), Auto, low miles, looks pristine condition & a pretty good price for an Auto. The 1979 5-spd has "S" wheels, high miles and basically no bids - no reserve however & it looks like it will need some work. This is an Oregon car, but have no clue where it came from. Don't know if I have ever seen it before. Love the tan interior with a black 928 - wish mine had that. Just FYI. Regards, Keith Martin 1980 5-speed LSD, Sunroof, S4 Brakes & Rear Wing, S Front Spoiler & other "stuff"
Started by Keith Martin @ · Most recent @
Oops 2
https://www.instagram.com/p/C6RHqiQCPAX/?igsh=NHFkenRsMXY3Y2Vy
Started by Huntnphool@... @ · Most recent @
Door panels, switches, locks and such 13
Hi all, I've been lurking on our forum for quite some time as life projects have gotten in the way of 928 projects. Last week my right side window wouldn't return up to fully closed. Long story short I've replaced the switch, removed the door panel and refreshed the regulator, motor, and slider wheel/mechanism based on some great advice from MrMerlin on Rennlist. Before reinstalling the door panel I wanted to check to see if anything else should be done as "regular maintenance" since I had the panel off. So, getting to my (hopefully) simple question. Does anyone know how to secure the lock cylinder so that it's flush to the body of the 928? There's about a 1/8 inch gap as illustrated in the attached image. Mechanically, everything works great and It's been like this since I've owned the 928 but have never gotten around to fixing it. Many thanks in advance, and good to "see" everyone here again. Andrew
Started by Drew @ · Most recent @
OB instrument cluster question time 5
Working on the pod/instrument cluster of the 79. Cleaned all the connections on the cluster with deoxit, and made sure there were no obvious breaks in the foil on the back. The foil seems to have been replaced at some point in the past as it's blue (not brown). Put it back in the 928 today and checked to see what's working etc. First try, all the gauges seemed to work and were responsive (including the previously non-functioning volt meter and oil pressure). Took it for a spin and speedo and odo still not working. Get back to check connections etc, and head back out, and on the second start up, the volt meter and oil pressure quit working. Also of note, on the first start, the ever present red "!" went away when releasing the parking brake and no warning lights in the cluster. On the second start (non-functioning oil pressure/volt gauges) I couldn't cancel or turn off the red "!". Questions for the group. Start with replacing the ignition switch? Just bite the bullet and get a new instrument cluster foil (or the new circuit board that's out there)? Any other potential culprits I should be looking at (like the sender for the speedo)? Any simple testing procedures for the gauges to see if they are DOA? and a final question: Checking the voltmeter when it was working it was showing up near 15 volts, which, when measured at the battery at the back (engine running) was about 14.5 at idle. Seems high for an OB? Haven't looked at the alternator yet, but is there an adjustable voltage regulator for the OB (I think Valeo) alternators? too high at idle? Don't really want to cook the new battery. Thanks in advance.........
Started by amidlman @ · Most recent @
Exotics at Redmond Town Center is "on" (Sat April 13) 2
Looks like stellar weather for Opening Day at ERTC. If you're not at the track with Keith, then head on over to Redmond. https://exoticsat.com/newsy/were-so-excited-to-say I won't make it this year (too many things to do around the house), but if you have the time, it's worth a visit. New stricter rules on getting in, but the 928 is usually accepted (as long as it's clean and presentable). Also, since this is opening day, you'll need to be there early (as in around 6am or so) if you want a space. Otherwise, park outside the area and walk in. I'm betting there will be some really cool cars there and with the weather being optimal and pent up need to get the cars out, I'm sure it'll be a great day. Tom
Started by amidlman @ · Most recent @
New group 49 (H8) battery for $135 2
This is a newer company offering batteries (Made in China) & they have a group 49 (H8) for $135 USD (Tax & shipping included 3 year warranty). They are rated average 4.6 of 5 stars by Amazon reviewers ($149 plus tax on Amazon) and they seems to put out more than the 900CCA's listed on the specs. It shows $149.99 on the website but it auto adds a promo code to make it $135.00 Mine came well packed with fast shipping from California so if anyone is looking for a cheap shark battery it could be a good choice. https://www.weizeus.com/products/weize-platinum-agm-battery-bci-group-49-12v-95ah-h8-size-49-automotive-battery-160rc-900cca-36-months-warranty?_pos=1&_sid=2902445a3&_ss=r WEIZE Platinum AGM Battery BCI Group 49-12v 95ah H8 Size 49 Automotive Battery, 160RC, 900CCA, 36 Months Warranty Boasting an impressive 160RC rating, our battery is your assurance of unmatched reliability and a service life that goes beyond conventional batteries. It's time to embrace enduring power like never before. www.weizeus.com _._,_._,_
Started by James Brown @ · Most recent @
Hooked On Driving At The Ridge Motorsports Park 2
Hey all - Are your Track Cars ready? Or is your wonderful street car (928's or other) ready for the Track for 2024. Friday and Saturday this week Hooked On Driving is at The Ridge Motorsports Park April 12 & 13. LOOKS LIKE NO RAIN!!! Very light signup so far so plenty of track space. The Ridge is definitely my favorite track for driving the 928. It's great for any car but the 928 worked so well there. As some of you remember, my 928 will not be there - I will be driving my #41 Stock Car - boy it is a beast and is so much fun to drive. No passenger seat so no ride-alongs but I can do some Lead Follow Coaching if anyone is interested. Contact me if you have any questions. Go to "Hooked on driving dot com" (no spaces - just don't want to put a link on the site in case it would be blocked) and sign up This year you do NOT have to "join" HOD in order to come to an event - saves $50. If you do sign up for this or any other HOD event, in the box towards the bottom where it asks where did you hear about HOD, put Adam Birnbaum or John Davis names and they will get a $40 credit for their next visit. Once you come, other 1st timers put your name down and you get $40 credit. I will be Coaching, but so few attendees this week (so far) I should be open for some quick no-cost coaching for my 928 friends at this event. If you are new to HPDE track driving, sign up for A group and you will get a Coach (ask for me) for the whole day. Keith Martin 1980 928 5-speed with lots of good stuff on it (retired from the track now)........
Started by Keith Martin @ · Most recent @
XXX in Issaquah is closing 9
Just saw a post on facebook that the XXX in Issaquah is closing for good after tonight. Looks like the concours light Porsche event in April will have to held somewhere else. Kind of a bummer, always a good time there. https://www.facebook.com/issaquahdaily/posts/pfbid0b9a17D6Q2s8NyChVwirpAJ5QRUg7JT2381U6UqYFqqKFM61vJUZLNqqLG5TYTQiil
Started by amidlman @ · Most recent @
WTB shop manuals 3
Looking for complete set of shop manuals for ¡®87-¡®91 928. Please email me at kschims@...
Started by Ken Schims @ · Most recent @
16¡± Bridgestone Potenza 4
FYI scored some 245/45/16 Potenza Sports on close out from track.com: https://www.tirerack.com/tires/tires.jsp?gclid=Cj0KCQjwzZmwBhD8ARIsAH4v1gUaSgtJFTZ8GQz-W-DaxtRuNMyzXpkF0-CRqyXjfYdiMohRLzPB_DIaAkZ8EALw_wcB&tireMake=Bridgestone&tireModel=Potenza+Sport&partnum=445YR6PSOS&GCID=C13674x012-tire&KEYWORD=tires.jsp_Bridgestone_Potenza+Sport_Tire&code=yes&ef_id=Cj0KCQjwzZmwBhD8ARIsAH4v1gUaSgtJFTZ8GQz-W-DaxtRuNMyzXpkF0-CRqyXjfYdiMohRLzPB_DIaAkZ8EALw_wcB:G:s&s_kwcid=AL!3756!3!!!!x!!&gclsrc=aw.ds&gad_source=1 -- Stefan Damstrom 1988 928 S4 Venetian Blue / Champagne 5 spd 2004 Carrera 4S Cabriolet Arctic Silver/Black Bellevue
Started by Stefan Damstrom @ · Most recent @
GT Sold On PCarMarket Last Week 2
Did anyone see this Black GT? Looks like it may have been a great deal. https://www.pcarmarket.com/auction/1990-porsche-928-gt-2/ Keith Martin 1980 5-speed w/S4 Brakes & Hatch/Wing, S Spoiler, Euro S Cams, GT Wheels
Started by Keith Martin @ · Most recent @
Auto upholstery 10
Hi All, My wife and I have moved up here a couple of months ago and enjoying the area although it seems like Colorado with the cold that has been around. I'm having my Upholstery redone and a majority of it is being done by Brian Wasinger in OK. He has done some real nice work for me already. He has completed my rear seats, door cards and made me the taller cassette tray. His work on Rennlist is what started me down this rabbit hole. I'm getting ready to send him my front seats next week. I would like to find a local Upholster to do my dash. The logistics to get it down to him and the extra cost due to the size of the container would add an extra $200.00 to this project. I have the dash leather that I got from Classic9 so I'm looking for someone that is competent and local to install it. Any help would be great. Look forward to meeting you all at some events around the area. I live in the Port Ludlow area. Thanks David Kekar
Started by Scurry @ · Most recent @
Current Image
Image Name
Sat 8:39am