开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. PacNW928
  2. Messages
Expanded Topics Messages Polls
Date
Re: Good day at ERTC - German Car Day

 

I've welded up those holes on a number of cars.... if you ever want to road trip...?

Cheers
Colin J
604-807-4523


On Sun, Jun 9, 2024 at 12:13?PM amidlman via <midlman=[email protected]> wrote:

Thanks,

Although the rub strip delete (started back in 06) is still unfinished LOL.? Black hides the holes well :) .?

I have decided to put the rub strips back on again since the car came with them in the first place and want to keep it as original as possible, even though I do prefer it without.

Now to find the missing pieces in the garage after a couple of moves.


BTW, the XXX event at the end of the month has been moved from the XXX in Issaquah to Carillon Point in Kirkland.? Not sure why, but am guessing Burgermaster isn't quite ready to host events just yet.




On 6/9/2024 12:02 PM, Brian Sullivan via wrote:
Congratulations Tom!? Looks like you finished your rub strip delete.? Sharks look best without for sure IMO. Hope to be at the XXX event at the end of the month?




On Saturday, June 8, 2024, 9:08 PM, amidlman via <midlman@...> wrote:

Never saw his Benz's when he's been there.? Mostly a Lambo or McLaren of some sort.?

On 6/8/2024 8:39 PM, Aaron Kraljev via wrote:
Sir Mix Alot was there? Did he have one of his Benz's with him?

On Jun 8, 2024, at 8:21?PM, amidlman via <midlman@...> wrote:

?

Jason and I represented at ERTC German Car day.? Beautiful weather and lots of great Porsches amongst other.?

I got there early enough to make the Center Circle area.?? First for my? "10 footer" 928 that just rolled over 340,000km (approx 211,000 miles).? When he put a yellow tag under my windshield wiper I was sure I was being relegated to the back room, so imagine my surprise when he said, follow the Mansory RSQ8 Audi to the Center Circle. !!

Even say Anthony (Sir Mix Alot) being pretty much incognito and ignore by most of the folks around him LOL.?

Cheers,
Tom

<20240608_084655.jpg>
<20240608_073308.jpg>
Re: Good day at ERTC - German Car Day

 

开云体育

Thanks,

Although the rub strip delete (started back in 06) is still unfinished LOL.? Black hides the holes well :) .?

I have decided to put the rub strips back on again since the car came with them in the first place and want to keep it as original as possible, even though I do prefer it without.

Now to find the missing pieces in the garage after a couple of moves.


BTW, the XXX event at the end of the month has been moved from the XXX in Issaquah to Carillon Point in Kirkland.? Not sure why, but am guessing Burgermaster isn't quite ready to host events just yet.




On 6/9/2024 12:02 PM, Brian Sullivan via groups.io wrote:

Congratulations Tom! ?Looks like you finished your rub strip delete. ?Sharks look best without for sure IMO. Hope to be at the XXX event at the end of the month?




On Saturday, June 8, 2024, 9:08 PM, amidlman via groups.io <midlman@...> wrote:

Never saw his Benz's when he's been there.? Mostly a Lambo or McLaren of some sort.?

On 6/8/2024 8:39 PM, Aaron Kraljev via groups.io wrote:
Sir Mix Alot was there? Did he have one of his Benz's with him?

On Jun 8, 2024, at 8:21?PM, amidlman via groups.io <midlman@...> wrote:

?

Jason and I represented at ERTC German Car day.? Beautiful weather and lots of great Porsches amongst other.?

I got there early enough to make the Center Circle area.?? First for my? "10 footer" 928 that just rolled over 340,000km (approx 211,000 miles).? When he put a yellow tag under my windshield wiper I was sure I was being relegated to the back room, so imagine my surprise when he said, follow the Mansory RSQ8 Audi to the Center Circle. !!

Even say Anthony (Sir Mix Alot) being pretty much incognito and ignore by most of the folks around him LOL.?

Cheers,
Tom

<20240608_084655.jpg>
<20240608_073308.jpg>
Re: Good day at ERTC - German Car Day

 

Congratulations Tom! ?Looks like you finished your rub strip delete. ?Sharks look best without for sure IMO. Hope to be at the XXX event at the end of the month?




On Saturday, June 8, 2024, 9:08 PM, amidlman via groups.io <midlman@...> wrote:

Never saw his Benz's when he's been there.? Mostly a Lambo or McLaren of some sort.?

On 6/8/2024 8:39 PM, Aaron Kraljev via groups.io wrote:
Sir Mix Alot was there? Did he have one of his Benz's with him?

On Jun 8, 2024, at 8:21?PM, amidlman via groups.io <midlman@...> wrote:

?

Jason and I represented at ERTC German Car day.? Beautiful weather and lots of great Porsches amongst other.?

I got there early enough to make the Center Circle area.?? First for my? "10 footer" 928 that just rolled over 340,000km (approx 211,000 miles).? When he put a yellow tag under my windshield wiper I was sure I was being relegated to the back room, so imagine my surprise when he said, follow the Mansory RSQ8 Audi to the Center Circle. !!

Even say Anthony (Sir Mix Alot) being pretty much incognito and ignore by most of the folks around him LOL.?

Cheers,
Tom

<20240608_084655.jpg>
<20240608_073308.jpg>
Re: Good day at ERTC - German Car Day

 

开云体育

Never saw his Benz's when he's been there.? Mostly a Lambo or McLaren of some sort.?

On 6/8/2024 8:39 PM, Aaron Kraljev via groups.io wrote:

Sir Mix Alot was there? Did he have one of his Benz's with him?

On Jun 8, 2024, at 8:21?PM, amidlman via groups.io <midlman@...> wrote:

?

Jason and I represented at ERTC German Car day.? Beautiful weather and lots of great Porsches amongst other.?

I got there early enough to make the Center Circle area.?? First for my? "10 footer" 928 that just rolled over 340,000km (approx 211,000 miles).? When he put a yellow tag under my windshield wiper I was sure I was being relegated to the back room, so imagine my surprise when he said, follow the Mansory RSQ8 Audi to the Center Circle. !!

Even say Anthony (Sir Mix Alot) being pretty much incognito and ignore by most of the folks around him LOL.?

Cheers,
Tom

<20240608_084655.jpg>
<20240608_073308.jpg>
Re: Good day at ERTC - German Car Day

 

开云体育

That’s awesome. Wish I could have made it?

On Jun 8, 2024, at 8:39?PM, Aaron Kraljev via groups.io <aaron.m.kraljev@...> wrote:

?
Sir Mix Alot was there? Did he have one of his Benz's with him?

On Jun 8, 2024, at 8:21?PM, amidlman via groups.io <midlman@...> wrote:

?

Jason and I represented at ERTC German Car day.? Beautiful weather and lots of great Porsches amongst other.?

I got there early enough to make the Center Circle area.?? First for my? "10 footer" 928 that just rolled over 340,000km (approx 211,000 miles).? When he put a yellow tag under my windshield wiper I was sure I was being relegated to the back room, so imagine my surprise when he said, follow the Mansory RSQ8 Audi to the Center Circle. !!

Even say Anthony (Sir Mix Alot) being pretty much incognito and ignore by most of the folks around him LOL.?

Cheers,
Tom

<20240608_084655.jpg>
<20240608_073308.jpg>
Re: Good day at ERTC - German Car Day

 

开云体育

Sir Mix Alot was there? Did he have one of his Benz's with him?

On Jun 8, 2024, at 8:21?PM, amidlman via groups.io <midlman@...> wrote:

?

Jason and I represented at ERTC German Car day.? Beautiful weather and lots of great Porsches amongst other.?

I got there early enough to make the Center Circle area.?? First for my? "10 footer" 928 that just rolled over 340,000km (approx 211,000 miles).? When he put a yellow tag under my windshield wiper I was sure I was being relegated to the back room, so imagine my surprise when he said, follow the Mansory RSQ8 Audi to the Center Circle. !!

Even say Anthony (Sir Mix Alot) being pretty much incognito and ignore by most of the folks around him LOL.?

Cheers,
Tom

<20240608_084655.jpg>
<20240608_073308.jpg>
Good day at ERTC - German Car Day

 
Edited

Jason and I represented at ERTC German Car day.? Beautiful weather and lots of great Porsches amongst other.?

I got there early enough to make the Center Circle area.?? First for my? "10 footer" 928 that just rolled over 340,000km (approx 211,000 miles).? When he put a yellow tag under my windshield wiper I was sure I was being relegated to the back room, so imagine my surprise when he said, follow the Mansory RSQ8 Audi to the Center Circle. !!

Even saw Anthony (Sir Mix Alot) being pretty much incognito and ignored by most of the folks around him LOL.?

Cheers,
Tom
Re: 85S running again

 

I believe it was my fault. I had just had the lower end rebuilt and reinstalled it and that was when I noticed that it would vibrate when getting on the throttle. I had did what you did and replaced most of the ignition bits. Still vibrated. Rechecked the timing and that was when I found it. So a bit different than your sequence of events.

David
1986.5
Re: 85S running again

 

开云体育

Did it slip a tooth at some point, or was it installed that way?

Mine was running fine for years before the vibration started.

Rob F.
253.209.8638
WPFC G12 Black
WPFC G14 Navy

GO PREMIER!




One Club, One Mission!
#alwayspremier

On Jun 7, 2024, at 3:55 PM, Scurry via groups.io <drkekar@...> wrote:

?Mine did that and I found my passenger side CAM was one tooth off. Put porken alignment tool on and got it right on and did not have the vibration after that.

David

Re: 85S running again

 

Mine did that and I found my passenger side CAM was one tooth off. Put porken alignment tool on and got it right on and did not have the vibration after that.

David
85S running again

 

开云体育

?Finally got mine back together and running, but I still have a issue. Took it for a drive and have a vibration when accelerating, the reason I took it apart in the first place.?

?I replaced plugs, plug wires, caps, rotors but something else is wrong. Backed it back into the garage and was going to check the new plugs to see if they are all firing, but the hood release handle popped off, the cable is not budging, so I can’t get the hood open.?

?I’ll dive in at some point this weekend to try to get the hood open and plugs checked out, but what are your thoughts??

?Clearly a cylinder isn’t firing, could it be injectors?

Rob F.
253.209.8638
WPFC G12 Black
WPFC G14 Navy

GO PREMIER!




One Club, One Mission!
#alwayspremier
In the Wild

 

Was driving South on 104 and saw a Red 928 driving North. Not sure if it is someone on this list or not. Not to often that I see another 928 on the road in the wild.
In fact it has been a couple of decades in fat. Last one was in mid 2000's when I was at the Sharktober Fest. It was good to see one.

David
Re: Surging cold idle

 

Does this car have an oxygen sensor, or purely mechanical CIS? If the former, a bad ground (at the sensor or, more likely, at the feedback control unit) can mess with the accuracy of the feedback provided by the sensor, and have the frequency valve constantly overcompensating and oscillating back and forth rich/lean.
Re: Original WSM Documents

 

Hi Roger-

Good to talk to you again. If you're willing to show me a couple of pages to compare, I'd be obliged. That said, I'll be putting in an order with you soon, so I'll just add one of those to the cart.

Cheers

Glenn
Re: Original WSM Documents

 

开云体育

Hi Glenn,

We have the originals as put together by Jim Morehouse and the rest of the interested parties on Rennlist.

Often copied by other peeps for sale on eBay.

They are pretty good copies.

Jim donated them to the 928 community along with thousands of other documents.

Happy to share a couple with you to see if they meet the standard you are looking for.


Best Roger

?

From: [email protected] <[email protected]> On Behalf Of Glenn W.
Sent: Wednesday, June 5, 2024 4:55 PM
To: [email protected]
Subject: Re: [PacNW928] Original WSM Documents

?

I'm really looking to get better scans. I have the things that have been floating around on the internet; probably from links I got on Rennlist, but they're not great. I think that a more modern copier would be able to get a scan of the whole sheet, instead of breaking it up over a couple of pages, like on the copies I have. Or worst case scenario, things are still broken up but at higher resolution and with text recognition.

If you're willing to part with the sheets for a little bit, I'm happy to pay for shipping back and forth and, of course, will share what I get digitized.

Cheers,

Glenn

Re: Original WSM Documents

 

开云体育

Great, you are welcome to anything you need. I'm around all weekend, shoot me an email to kraljev@... and we can set up a time to meet.?

Cheers.?

On Jun 5, 2024, at 3:14?PM, Glenn W. via groups.io <gwhitener@...> wrote:

?Hi Aaron-

That would be great; indeed, I'm talking about the service manuals. I'm focused on the wiring diagrams, but completely willing to rescan everything.

Let me know how to pick them up; I'm flexible Friday and this weekend.

Cheers,

Glenn

Re: Original WSM Documents

 

Hi Aaron-

That would be great; indeed, I'm talking about the service manuals. I'm focused on the wiring diagrams, but completely willing to rescan everything.

Let me know how to pick them up; I'm flexible Friday and this weekend.

Cheers,

Glenn
Re: Original WSM Documents

 

开云体育

Hey Glenn, I want to make sure I am tracking. WSM's = the service manuals??

If so I have a set. I'm likely selling my car and was not going to pass them along to whomever the next owner is so you are welcome to use them. Seems like a worthwhile, if not arduous task :)?

On Jun 5, 2024, at 3:55?PM, Glenn W. via groups.io <gwhitener@...> wrote:

?I'm really looking to get better scans. I have the things that have been floating around on the internet; probably from links I got on Rennlist, but they're not great. I think that a more modern copier would be able to get a scan of the whole sheet, instead of breaking it up over a couple of pages, like on the copies I have. Or worst case scenario, things are still broken up but at higher resolution and with text recognition.

If you're willing to part with the sheets for a little bit, I'm happy to pay for shipping back and forth and, of course, will share what I get digitized.

Cheers,

Glenn

Re: Original WSM Documents

 

I'm really looking to get better scans. I have the things that have been floating around on the internet; probably from links I got on Rennlist, but they're not great. I think that a more modern copier would be able to get a scan of the whole sheet, instead of breaking it up over a couple of pages, like on the copies I have. Or worst case scenario, things are still broken up but at higher resolution and with text recognition.

If you're willing to part with the sheets for a little bit, I'm happy to pay for shipping back and forth and, of course, will share what I get digitized.

Cheers,

Glenn
Re: Original WSM Documents

 

开云体育

If you get desperate, I've got them up here in Oly.? Can figure out a way to get them to you.

Has this already been done (Rennlist)? or are you looking to get better scans?


Cheers,
Tom

On 6/5/2024 1:50 PM, Glenn W. via groups.io wrote:

Does anyone in the Portland area have the original WSM documents that they'd let me borrow, so as to make new and improved scans of the wiring diagrams? I know this is sort of a big ask, but I'm willing to put in the time to get everything scanned and into an OCR'ed pdf.

Any help would be appreciated.

Cheers,

Glenn

241 - 260 of 42662