Keeping on with my CIS testing. ?I have a 79 with a 063 WUR. ?The WUR was rebuilt 6 years ago, and has 4,000 miles on it.
I had assumed that the top vacuum port on the WUR was supposed to hold vacuum, and that the lower port was to be vented. ?In my case, the top port is connected to the right side of the TB, while the lower port is connected to the rear of the TB
But the top port does not hold vacuum, while the lower one does.
Also, I went to go check my control and system pressures. ?My kit came fitted with M12x1.5 inverted flare fittings. ?But the hard line on the WUR has 10x1 fittings, both in the body side and the flare side.
Any idea where I could find an adapter?
Cheers
Peter S s/v Dawa II