Re: Mode not coming over from station config (5.04.01)
Frank,
Corrected the issue:
Please let me know if this works for you and I will get it out to
everyone.
Dean
On 9/18/2019 6:26 PM, Frank Drewes
wrote:
toggle quoted message
Show quoted text
When using any of the station configurations, when I make a
contacts, all settings are imported into the contact except the
'Mode' field.
I tried creating a new station configs, using station configs with
different mode values etc with no success on any of them.
I'm running 5.04.01
Thanks,
Frank
|
Mode not coming over from station config (5.04.01)
When using any of the station configurations, when I make a contacts, all settings are imported into the contact except the 'Mode' field.
I tried creating a new station configs, using station configs with different mode values etc with no success on any of them.
I'm running 5.04.01
Thanks,
Frank
|
Re: Time format on sample report shows incorrect layout
Frank,
Just right click on the time field, then select display format
and blank it out. This is a old artifact.
Dean
On 7/22/2019 6:57 AM, Frank Drewes
wrote:
toggle quoted message
Show quoted text
Dean,
?
I was using the premade report – ‘QSL label
8162’ to create a new label, and noticed that the time format
was ‘HH:SS’ instead of something like ‘HH:MM:SS’ I fixed it by
deleting the field and re-adding it new, which gave me
HH:MM:SS
?
I was looking at the DisplayFormat value
for the time text box of the original one, and it showed a
cutom value of ?!90:00;? - while the new one was blank. Is
there documentation on what those numbers and characters
represent?
?
?
Luckily, I caught it before I sent out the
80 cards I printed labels for
?
?
?
?
|
Time format on sample report shows incorrect layout
Dean,
?
I was using the premade report – ‘QSL label 8162’ to create a new label, and noticed that the time format was ‘HH:SS’ instead of something like ‘HH:MM:SS’ I fixed it by deleting the field and re-adding it new, which gave me HH:MM:SS
?
I was looking at the DisplayFormat value for the time text box of the original one, and it showed a cutom value of ?!90:00;? - while the new one was blank. Is there documentation on what those numbers and characters represent?
?
?
Luckily, I caught it before I sent out the 80 cards I printed labels for
?
?
?
?
|
Re: NetName field not imported.
Dean,
Thank you?for your reply.? I am learning by doing.? Never mind the QSL field question.
My biggest task ahead is to update the NetName field manually.
Paul
On Sun, Apr 7, 2019, 18:48 N7XG < dean@...> wrote:
Paul,
I would suggest that you take a look at
I do not think NetName is stored by Netlogger.
Also what do you mean by the QSL field? Also keep in mind that
NetLogger only keeps track of basic data and is not a log book
program like N7XG Logger is.
Dean
On 4/7/2019 1:08 PM, 38671gardener
wrote:
I've converted my Netlogger database over to N7XGLogger.? Can the
NetName field be populated by data from the NetName field from
Netlogger?
I've also run the fix for update problems, but still have no
information in the QSL field. ?
I'm running version 5.03.03.
Thanks!
Paul
KD4GUB
|
Re: NetName field not imported.
Paul,
I would suggest that you take a look at
I do not think NetName is stored by Netlogger.
Also what do you mean by the QSL field? Also keep in mind that
NetLogger only keeps track of basic data and is not a log book
program like N7XG Logger is.
Dean
On 4/7/2019 1:08 PM, 38671gardener
wrote:
toggle quoted message
Show quoted text
I've converted my Netlogger database over to N7XGLogger. ?Can the
NetName field be populated by data from the NetName field from
Netlogger?
I've also run the fix for update problems, but still have no
information in the QSL field. ?
I'm running version 5.03.03.
Thanks!
Paul
KD4GUB
|
NetName field not imported.
I've converted my Netlogger database over to N7XGLogger. ?Can the NetName field be populated by data from the NetName field from Netlogger?
I've also run the fix for update problems, but still have no information in the QSL field. ?
I'm running version 5.03.03.
Thanks!
Paul
KD4GUB
|
Thanks Dean
Followed your instructions and it works fine now.
Jim
|
select a time zone with the appropriate UTC offset that also allows setting "automatic adjustment of the clock for DST." Then if DST isn't observed simply uncheck that little box that allows Windows to automatically adjust the clock for DST. DO NOT select a time zone that doesn't have this check box because the settings for such a zone may not have start/end dates for DST
|
I down loaded the latest logger update and when I try to monitor a net in progress, I get this error message "eD Start" is not a valid date. The rest of the logger functions seem to work OK. The logger worked fine until I down loaded the latest up date. I am running Windows 7. Any suggestions as to how to fix this problem would be appreciated.
|
Just a test to see I can post to this blog.Tried before with no luck
|
Hi,
?Has anyone tried/used the card stock from "HamStuff by W7NN"? If so, do their perforations lines line up with the N7XG 4up cards better than the perfs on the generic stock available from Staples, et al? Inquisitive minds want to know...
Steve - N6RSH
|
Dean,
?Thank you VERY much. I now show just over 17000 contacts PERFECTLY. I want to thank You and Rick for ALL the work you did for me and all of the work you both continue to do for us all.?
VERY Best 73,
Steve
|
2nd try. I see the attachments on the bottom. Lets see if they go this time.
Steve
|
Steve,
Nothing got attached.
Dean
On 3/9/2019 11:45 AM, wb5fdp wrote:
toggle quoted message
Show quoted text
Dean,
?
Could
he replace the “contacts” files with this one, and merge his
old log into it?
?
Rick
?
?
Steve,
If you are trying to merge the data file sent to rick you
should be using the Merge Log File menu item under the File
menu.
The Log Convert is designed to take basic data from other log
books and get something into yours.
Take a back of your logger and send it to me along with the
file you are trying to meter from.
Dean
On 3/8/2019 6:49 PM, n6rsh wrote:
Dean,
Just to be save, here's a few formats. Hopefully one will
work. Let me know which one works (if any)
Steve
|
Dean, ? Could he replace the “contacts” files with this one, and merge his old log into it? ? Rick ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of N7XG
Sent: Friday, March 08, 2019 11:49 PM
To: [email protected]
Subject: Re: [N7XGlogsupport] Log Conversion? Steve, If you are trying to merge the data file sent to rick you should be using the Merge Log File menu item under the File menu. The Log Convert is designed to take basic data from other log books and get something into yours. Take a back of your logger and send it to me along with the file you are trying to meter from. Dean On 3/8/2019 6:49 PM, n6rsh wrote: Dean,
Just to be save, here's a few formats. Hopefully one will work. Let me know which one works (if any)
Steve
|
OK. I will send you the zip file. This is a screen shot when I tried to do the Merge Log File function?
Steve.
|
Steve,
If you are trying to merge the data file sent to rick you should
be using the Merge Log File menu item under the File menu.
The Log Convert is designed to take basic data from other log
books and get something into yours.
Take a back of your logger and send it to me along with the file
you are trying to meter from.
Dean
On 3/8/2019 6:49 PM, n6rsh wrote:
toggle quoted message
Show quoted text
Dean,
Just to be save, here's a few formats. Hopefully one will work.
Let me know which one works (if any)
Steve
|
|
|
Dean,
Just to be save, here's a few formats. Hopefully one will work. Let me know which one works (if any)
Steve
|
n6rsh
