¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. N3FJPSoftwareUsers
  2. Topics

DX Spots

 

I have hosed something up.? The only option I have in the Telnet Host widow is WB3FFV which is fine except I cant connect to it.? Should I not have more options?? Am I even at the right screen here??? A lot of the failure to connects were when I had Auto Reconnect checked (unchecked for now).? I am confused and stumped.
?
 

Did you forget to check the box for Enable DX Spotting?
? ? ? ? ? ? ? 73,? ......? Bruce N8BV


On Sat, Nov 30, 2024 at 4:59?PM K0CIE via <karl=[email protected]> wrote:
I have hosed something up.? The only option I have in the Telnet Host widow is WB3FFV which is fine except I cant connect to it.? Should I not have more options?? Am I even at the right screen here??? A lot of the failure to connects were when I had Auto Reconnect checked (unchecked for now).? I am confused and stumped.
?
 

Hi Karl,

Thanks for your e-mail.? You removed the other defaults from your list.? You can add any site to the list you like by entering the appropriate values, enabling and then exiting the form.? Successful connections are saved to your list as you click Done, so repeat for each telnet host you wish to add.

Enjoy!

73, Scott
N3FJP


¿ªÔÆÌåÓý the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...


On Saturday, November 30, 2024 at 04:59:24 PM EST, K0CIE <karl@...> wrote:


I have hosed something up.? The only option I have in the Telnet Host widow is WB3FFV which is fine except I cant connect to it.? Should I not have more options?? Am I even at the right screen here??? A lot of the failure to connects were when I had Auto Reconnect checked (unchecked for now).? I am confused and stumped.
?
 

Thank you.? While it seemed obvious that I needed something there, I had no idea what to add.? Found dxspots.com in one of your help pages and that works fine.? Thank you for the help.
?
?
TU? KARL? K0CIE
 

Here is a telnet directory which lists them all.



If you look up WB3FFV you'll see where you have "23" it should be "7300". Change that and it should connect.

--
73
Fred
K2DFC
 

¿ªÔÆÌåÓý

Hey K0CIE.? About a week or so ago VE7CC was having power outage issues due to a storm off the coast.? He might still be having issues.

?

Pat ¨C KZ5J

?

From: [email protected] <[email protected]> On Behalf Of K0CIE
Sent: Thursday, December 19, 2024 2:52 PM
To: [email protected]
Subject: [N3FJPSoftwareUsers] DX Spots

?

I am trying to add a spotting website and am striking out.? Would like to have VE7CC as? my source and am not able to access it via ACLog regardless how I try to enter it. My setting are:

?
 

Almost every cluster gets spots from VE7CC. If you are
connected to others, you'll still get them. Feel free
to use others. It's time to spread out.

Might I suggest:? W7JD-1, k7ek.freeddns.org, Port 9000

I also run Lee's CCC software here in Kentucky and have a
direct connection to him and a half dozen other nodes.

Best regards,

Gary, K7EK





On Thursday, December 19, 2024 at 03:52:29 PM EST, K0CIE <karl@...> wrote:


I am trying to add a spotting website and am striking out.? Would like to have VE7CC as? my source and am not able to access it via ACLog regardless how I try to enter it. My setting are:
?

1 - 7 of 7