开云体育

I usually get 2 error messages when I try to upload a file of contacts. When I click on ignore on both error messages it will then upload some of the contacts usually about? 80 % I will then go

Hi Nigel, Thanks for your e-mail.? This FAQ here will get you going: The AC Log bearing and distance doesn’t seem to work properly for stateside QSOs? https://n3fjp.com/faq.html#q21 Enjoy! 73,

I noticed that the Bearing value in the software is not the same as in the DX Spotting window. For example, KH8RRC is showing a bearing of 258 whereas the DX spotting window shows it as 234 (which I

Thank you for letting me know about this. Greg

Thanks Stephen. 73. -- 73. BOB -- K6RWM

Hi Greg, Thanks for your e-mail.? The Net Manager form isn't user customizable, so you won't be able to use that form's net management functionality if you want to continue capturing the additional

We run a week day morning net on 2 meters.? Callers check in with their member number and call sign, or just their call sign until they meet the criteria for a member number.? I wrote a front end

Thanks for the quick reply Scott, I got it solved the KEY cable from Navigator was hanging down in back of table and I wasn't aware of it not being plugged into the FTDX5000.. I had my hand key

Tu sir! Wyndell Ferguson – <https://www.k5wjf.com/> K5WJF Sawyer/Farming/Hay Sent: Friday, July 7, 2023 07:01 To: [email protected] Subject: Re: [N3FJPSoftwareUsers] 13 Col EXPORT

Hi Wyndell, Thanks for your e-mail.? That is correct, FT4 is the submode.? The ADIF group has published their specs here: https://www.adif.org/314/ADIF_314.htm#Mode_Enumeration Enjoy! 73, ScottN3FJP

When I export my 13 col adi files for submission the FT4 contacts are showing as MFSK. Is this normal or did I do something wrong? 73, Wyndell – <https://www.k5wjf.com/> K5WJF -- This email has been

Hi Joe, Thanks for your e-mail.? I'm sorry that you ran into trouble.? I'm not familiar with the Timewave Navigator, but our software sends CW identically in all rigs, using your hardware keying

Kevin....I sent the original question on this. My problem is in the sequence that you describe below, yes the tab sends the F2 string correctly but when I hit enter the F3 sequence is sent about 3

I have issues with N3FJP main logging program not Keying FTDX5000 TX on Transmit program Transceiver blinks?No RF going out... using timewave navigator... Receive is fine.. Menus on 5000 should be

Fred Did you try "Help>Ask Juliet" If you are running a frequency, you can optionally use the Tab Sends Message (TSM) feature. To enable the Tab Sends Message (TSM) option, press Ctrl + Shift + G from

I'm still trying to figure out what TSM stands for. And I use many of the contest logs all the time. -- 73 Fred K2DFC

There is under state qso parties Stephen Spencer

I just received an email from the CAQP organizers, together with a survey for participants. Is there a possibility that there will be an ACL log for this event, which is on October 7-8? The exchange

Well Chris I tried but no luck. I did turn on sharing on both computers but not getting anything coming from one to the other. I think I am over my head on this one. -- 73'S DAVE NU4N

Ok well that sounds easier. Thanks. -- 73'S DAVE NU4N