开云体育

After using the CQ WW log this weekend (and loving it), I went back to ACLog this morning and the rig interface function has stopped working. Even after reloading a previously saved version that I

For some reason I had two rigs setup (don’t have two rigs) for something I was doing in the past. It appears to be working correctly after swapping rigs. Sorry for the bother! Appreciate your

Hello and thanks for reading my message… I am trying to load and run the Meshsense App on a 64 bit AMD processor machine running a fully updated versions of Linux and an OS of Ubuntu Jammy

Hi Randy, Thanks for your follow up.? I'm sorry that you are still having trouble.? Once configured properly, the frequency will update as you turn your VFO.? Make sure you use the Yaesu Newer 2

A bit of added info. When you hit a DX spot it will change the xcvr to that frequency. Also the large data screen at the bottom of the rig interface setup page is highly populated.

I pulled the cable that comes out of the yaesu ftdx101mp (com4) from the computer. I then put it back in and was able to get rig interface to accept the com port and it is now working on the rig

Hi Fred, Remember that the "Queue Time" is only reported once/hour.? If a big log came in just before you uploaded it will take longer to clear your upload. Larry / W1DYJ

Perhaps not to your specific question .... I often check LoTW's queue time after doing an upload.? Previously (months ago) the minimum queue delay would usually be just less than 60 seconds - unless

That fixed it! Well, first I had to check "Record RST", that took care of the problem, then I had to set the default RST. Those are the settings that changed when my computer rashed, thanks for the

Hi Mark, Thanks for your e-mail.? Nothing is immediately changed in your log on upload.? You have to do a subsequent download, after LoTW has processed your records.? More details are here: I

Hi Kerry, Thanks for your e-mail.? Click Settings > RST Settings and set to your preference.? Deselect the option to leap over the fields if you prefer. Enjoy! 73,

I will also note that we should be on the latest version of TQSL. Version 2.7.5 was just released. 73 -Jim NU0C "Dave (NK7Z) via groups.io" <dave@...> wrote:

Hi Mark, While I can't help you with what is wrong, I can let you know ACLog, and LoTW, deal with my log, (50K contacts), flawlessly.? Is your TQSL cert still valid? 73, and thanks, Dave

Don’t know if it will help for sure. It I would run ChkDisk against it and make sure any problems are fixed. Bill Grover bgrover@... ________________________________ Sent:

Guys, I had the CQWW logger open this morning, along with my Flex 3000 when I was playing around in the contest and the computer crashed. When I rebooted, the Flex was working but the logger didn't

After working flawlessly for years, today when I hit "All since 2024/11/22" in AClog's LoTW window, everything processed as usual, but the QSOs just processed weren't marked as "QSL Sent" nor were the

Hi Scott, A followup to my suggestion for highlighting a placeholder on the dx spotting screen: I have found that if you right click and hold on a row, then slide the pointer off of the row, the

URL broken by word wrap. You can fix it like so: https://www.contestuniversity.com/wp-content/uploads/2019/05/4-N6TV_Dayton_2019_Everything_USB.pdf "Lou WA5LOU via groups.io"

Page could not be found. Lou Wa5Lou [email protected]> wrote:

>>>>>>>>>>>>>>>>>>>> Everything You Need to Know About USB and Serial Interfaces