开云体育

Good Morning All On mine I use two com ports, one for rig control and the other for cw. Works fine. I use the paddle setting in the menu. (I know it says set to straight key, but paddle works fine). I

Thanks for the reply. I have my logs backed up on a USB drive every time I exit the program. So I imported the latest mdb file I and good to go. 73's NU4N Dave

Thanks for the good report and information Dave! Enjoy! 73, ScottN3FJP http://www.n3fjp.com 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs

Hi Mel, Thanks for your e-mail.? Assuming you entered your name in Settings > Setup before the contest, directly under the name you received is the name you sent.? The tag looks like

Hi Dave, Thanks for your e-mail.? Your log file isn't associated with the rig you have selected from the rig interface form.? You can restore your AC Log log file from backup as detailed here: If I

I use VSPE with my 7300 for doing RTTY off a single cable and seems to work fine. https://eterlogic.com/Products.VSPE.html Andre, WT9X

Oh, yes...I see you did, sorry 'bout that Mitch!! I had installed AClog on another (very cheap) laptop, and it worked ok. So, I was preoccupied with A-B comparing the two to find out what the heck

Hi Don, Thanks for your e-mail.? The data is retrieved from any callbook lookups you may have configured, not the previous record. Enjoy! 73, ScottN3FJP http://www.n3fjp.com 开云体育 the Amateur Radio

Need some guidance. Entering a call who was 'activating' two lighthouses (differing names and numbers). Entered first and deleted County and Grid because they were wrong. Ckiked on Recall to enter

That's what I asked you five days ago!!!? Glad you got it working... 73, Mitch

You should use the export tool under the file drop down. Export creates an adif file 73 Art N2AJO

If they are open source, you might be able to create a script (batch file since it’s Windows) that provides the interaction. Or tweak their main methods to include parameters that you pass in for

The problem was the *auto upload* to LoTW. !! Turned that off, and problem solved! Switched my active log from Onedrive to my local C drive, and that seems to have helped a bit more. Thanks to

for some reason my adi file does not have name sent in any contact. is there an easy way to correct this Mel NE9A

Dave It could be internet latency. Is your log on a local drive, or is it in the cloud ?? (Onedrive, Google drive, etc) Are you set to “Real time upload” to any of the eLog ? (eQSL, LoTW, QRZ

Hi Dave, Thanks for your follow up.? With TSM<, the CW sending occurs after saving the log entry.? If for some reason you have a delay on your system before the entry is written to your log file,

Dave, That probably would be the problem. Have you tried to change the file location from One Drive to your local hard drive? It is slow to log the contact to One Drive. Tom K5TEE

Thanks Steve!? Yes, from all my looking stuff up this morning, the USB and C-IV is required for the 7300, but only a single USB for the 7610 and 705. I think I'm correct on that. .....Dave

Dave, With both the USB and C-IV cable it is possible. If not, you need a com port splitter which I have never tried. Hope this helps. Steve, AI3KS

Scott....On the TSM delay I mentioned earlier, is it possible the error indication below might help? It seems when it it trying to write the new contact to the logbook AND send the F3 contents at the