开云体育

Hi Don, Thanks for your e-mail.? The data is retrieved from any callbook lookups you may have configured, not the previous record. Enjoy! 73, ScottN3FJP http://www.n3fjp.com 开云体育 the Amateur Radio

Need some guidance. Entering a call who was 'activating' two lighthouses (differing names and numbers). Entered first and deleted County and Grid because they were wrong. Ckiked on Recall to enter

That's what I asked you five days ago!!!? Glad you got it working... 73, Mitch

You should use the export tool under the file drop down. Export creates an adif file 73 Art N2AJO

If they are open source, you might be able to create a script (batch file since it’s Windows) that provides the interaction. Or tweak their main methods to include parameters that you pass in for

The problem was the *auto upload* to LoTW. !! Turned that off, and problem solved! Switched my active log from Onedrive to my local C drive, and that seems to have helped a bit more. Thanks to

for some reason my adi file does not have name sent in any contact. is there an easy way to correct this Mel NE9A

Dave It could be internet latency. Is your log on a local drive, or is it in the cloud ?? (Onedrive, Google drive, etc) Are you set to “Real time upload” to any of the eLog ? (eQSL, LoTW, QRZ

Hi Dave, Thanks for your follow up.? With TSM<, the CW sending occurs after saving the log entry.? If for some reason you have a delay on your system before the entry is written to your log file,

Dave, That probably would be the problem. Have you tried to change the file location from One Drive to your local hard drive? It is slow to log the contact to One Drive. Tom K5TEE

Thanks Steve!? Yes, from all my looking stuff up this morning, the USB and C-IV is required for the 7300, but only a single USB for the 7610 and 705. I think I'm correct on that. .....Dave

Dave, With both the USB and C-IV cable it is possible. If not, you need a com port splitter which I have never tried. Hope this helps. Steve, AI3KS

Scott....On the TSM delay I mentioned earlier, is it possible the error indication below might help? It seems when it it trying to write the new contact to the logbook AND send the F3 contents at the

The Icom IC7610 can do rig control and CW keying at the same time with N3FJP. I am thinking the Icom IC-7300 CANNOT? It only installs a single com port driver, whereas the 7610 installs two. So one

I'm trying to automate a process that will run several times a day without user interaction so I need the converter to be non-interactive and able to be run from a Windows command-line.? I'm hoping

Just do File>Export to ADIF. That should do what you want. Bobby/N4AU -- n4au@... n4au@...

Can anyone point me to a reliable conversion tool that will convert an ACLog .mdb database file to an .adif file? I need one that can be run from the command-line in Windows and doesn't need any user

Thank you Scott!!! That worked!!! I have been ignoring this problem for 2 years. Your the best!!! See you.down the log.Kc3nduKeith Sent from AOL on Android On Sat, Jul 15, 2023 at 6:02 PM, Scott

*I had a hard drive crash on my Desktop that is hooked to my Kenwood 2000. I write a back file to my USB D drive. Also I do the same for? my ICOM 7300. I was wondering if I save and adif file on the

Hi Keith, Thanks for your follow up and the screen shot.? That's very helpful.? Click Settings > Reset Columns to Default > Widths. Enjoy! 73, ScottN3FJP http://www.n3fjp.com 开云体育 the Amateur