开云体育

I’m adding a new transceiver to my shack and I want to track contacts based on the transceiver used to make each contact. I’ll probably be switching back and forth between radios. I successfully

Yes. Excellent! Thanks! 73, Ken KN2D CW Ops #3566 Constant Contact's Top Trainer/Partner Try Constant Contact free for 30 days by going to http://www.TheBestEmailOffer.com Need help with email

Solution! At MENU#62 *Lower* USB Port baud rate from 115200 (Default) to 38400. *-Jim* James H. Goff 207-944-3297 (c) [email protected]> wrote:

Problem solved......Thanks Scott! Now to do some serious editing! Dale K8TS ________________________________ Sent: Sunday, February 16, 2025 6:16 AM To: [email protected]

The best thing to do is wait until the contest is over and then export/import the whole log at once. -- 73 Fred K2DFC

Hi Ken, Thanks for your e-mail.? The contest software exports all records via ADIF.? To remove duplicates from your log file, click File > Remove Duplicates. Enjoy! 73,

Hi Dale, With Yaesu Newer selected your frequency will be one digit off, as that is the incorrect selection for your rig.? Use Yaesu Newer 2 for your Yaesu 10 to have the frequency interpreted

I made the mistake of exporting all records from N3FJP ARRL DX Contest to import them AC Log early in the day, and then doing another export of all entries from the contest log to import them to AC

Well here we are Saturday nite of DX and I just noticed my frequency readout is incorrect. On 40 rig is at 7.055.770 and RI shows 0.70558 on Yaesu DX 10 All settings a what has been shown except using

I am unable to restore Rig Interface on my TS-590s after many years of proper function. I recently moved my rig (but a a few short distance), updated the rig firmware; I have confirmed COM port and

I have been using RemoteHams for quote sometime and when logging directly the LOTW im able to specificy the correct RemoteHams Grid im using to correctly note in the log the Remote CO station grid im

Since April 2020 TQSL has an override to allow LoTW to use station location information in the log rather than having to create a new station location for each activation. See release notes for TQSL

This is how I do it.? I currently use the Ham2K Portable Logger for POTA.? Export that as an ADIF then import into ACLog.? For me I don't really worry about POTA stats or info in ACLog.? I use the

VA QSO Party Contest bonus stations for 2025 are: ? Six SPARC stations will be bonus stations worth *50 points*. Subsequent QSOs with the same station are worth 0 bonus points. Bonus stations

Hi Mike, Thanks for the great tips. The file naming was mentioned in the video, but thanks for reinforcing the proper format. I know about exporting a selected group of records, so the idea of one

I've read about those and may try them out at some point. For now, I am familiar with ACLog and will get my feet wet with it. There shouldn't be a problem, but HAMRS is 32-bit and the laptop is

I'll be uploading (emailing) the park-specific ADIF to the POTA coordinator as well. I don't want to cheat the hunters. Brian D. Warner WB0NWZ

Hi Steve, Thanks for the info. I watched some YouTube videos last night, including the one mentioned in the FAQ. and have already created a POTA configuration, so I'm set in that regard. A

Sooooo – welcome to the FUN. YES – for best use the SETUP screen (control-S) should be set up correctly for each location you operate from. However, there are a few notes to help you make better

I use N3FJP for my "source of record" - my official log.? But for POTA I prefer using a dedicated app, then import into N3FJP which I have set up permanently using the POTA template with some tweaks