开云体育

Yes I do it from all the contest software via api. I am sending instructions below https://www.n3fjp.com/faq.html#q6 Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent:

Yes, Export the entire FDlog as .adi file Import this .adi file into ACLog If both logs are on the same computer this should take 1 minute or less. Dave KC3AM

Can entries in the Field Day log entries be transferred to the regular ham log?

I select blocks of records as you do, Dave, and often have thought how nice it would be to see the selection count. I vote for that, too. Gary, N8Lr

Is there a way to see a count of selected records? I often select a range of records in AC Log with a shift-click. It would be super helpful if there was an indication of how many records were

I don't know what other things you may be using your log for, but the name etc. is not needed for POTA purposes and takes a tiny bit of computer time to process. I would simply turn off the lookup

Hit the escape key and it erases the contact. Then start again. If you have hit the enter key, you have to go back and edit that line. Scott probably has a better answer.

Hi Jim, Thanks for your e-mail.? Yes, if you have already tabbed before realizing the call is incorrect, just press Esc before reentering the call sign. Enjoy! 73, ScottN3FJP http://www.n3fjp.com

I use ACLog (N3FJP) almost exclusively for logging my POTA activations. I have 3,741 contacts in my log. More times that I can count, ACLog has associated an incorrect name with a callsign.? I know

I’ll check that. - 73 - - Michael Coslo N3LI - Frequency Coordinator, Beaver Stadium President, Nittany Amateur Radio Club mjc5@... mjcn3li@... Mobile 814-404-3991

For a shared log, you must make one of the workstations share its log directory, and the other ones must open that log file via the network share (or use the new TCP mode). wrote:

Be sure that all the PCs have WRITE ACCESS to the shared folder on the main PC. Tom N4LSJ

Hey all, I’m learning the networking between multiple computers using N3FJP software. They see each other, and can pass messages back and forth, and give me warning messages, and log. I don’t see

Apologies for the off-topic nature of this post. I will only be posting it once to this group. ? You can help a good cause with just a couple of mouse clicks. Subscribe to the CQ Blind Hams Youtube

Scott, for the time being I’m going to use number 1 . I’m just going to disable rig control when I’m not working ft8. Anybody out there can give some feedback/ suggestions on the virtual com

Hi Randy, Thanks for your e-mail.? For rig control, when interfacing another application with our software, since Windows won't allow port sharing among programs, you have three options for rig

Sounds to me like you you have both programs pointing to the same USB port. If you have installed the correct drivers, the FT-101 has the dual ports. Allocate one to ACL and the other to WSJT-X.

Running a yaesu ftdx101mp. Prior to getting on ft8 rig and ac log were communicating with each other as to frequency you were on. Ac log not doing that now . When you open ac log a message comes up

Super Kevin, thanks for the good report! Enjoy! 73, ScottN3FJP http://www.n3fjp.com 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always

Use notepad to edit the cabrillo file like Scott said. This is what the file is supposed to look like: https://ncjweb.com/NAQP_Cabrillo_Template.txt Andre, WT9X