开云体育

Hi Scott

I verified that I did both of your suggestions:

Click Settings > Carry Comments Data Forward so that it is unchecked.

Click Callbook > Place Retrieved Address in Comments Field so that it is unchecked.

This did not help my issue.

This is from WSJT-X:

73 Mark K3MSB

On Sat, Apr 12, 2025 at 11:51?AM Scott Davis via <SNKDavis=[email protected]> wrote:

Hi Mark,

Thanks for your e-mail.? Unless you are logging the same call sign, the repeated value in the comments field is coming from a connected program, not AC Log.??

If you prefer to not have the Comments field filled automatically from AC Log, you can do either or both of the following:

Click Settings > Carry Comments Data Forward so that it is unchecked. This will keep previous comments data with the same station from being brought forward to the current QSO.

Click Callbook > Place Retrieved Address in Comments Field so that it is unchecked. This will keep callbook retrieved data for the current contact from being added.

You will need to modify behaviors from connected programs in those applications.

Enjoy!

73, Scott

N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...

On Saturday, April 12, 2025 at 11:46:36 AM EDT, Mark Bell via <myscupper=[email protected]> wrote:

It is turned OFF in WSJT-X.

Mark

On Sat, Apr 12, 2025 at 10:46?AM Dave Garber via <ve3wej=[email protected]> wrote:

turn off the retain in wsjtx's log window?

Dave Garber

VE3WEJ / VE3IE

On Sat, Apr 12, 2025 at 9:21?AM Larry Banks via <larryb.w1dyj=[email protected]> wrote:

Where did you enter than comment -- in ACLog or WSJT-X?? If in WSJT-X do you have "Retain" checked?? In ACLog, I believe the Carry Comments Forward applies only to the same station.? Try erasing the comments on the next Q you log.

Larry / W1DYJ

On 4/12/2025 09:04, Mark Bell via wrote:

Good Morning!

I entered a comment in the Comments field when I logged an FT-8 QSO.

Now that comment is replicated for each QSO I log!

According to the on-line documentation, that can be stopped by unchecking

Settings -> Carry Comments Data Forward

I've done this and it doesn't help.

Suggestions?

73 Mark K3MSB