开云体育

On 02/05/2025 6:24 PM PST JoAnn Donaldson via groups.io <joannplano2005@...> wrote:

?

?

?

I also have ACLog, WSJTX, and JTAlert all working together. Trick is link WSJTX to JTALert and then link JTAlert to ACLog.

???? WSJTX? -? Check Prompt me to Log

?????????????????????? Enable PSKReporting

?????????????????????? UDP Server? - 224.0,0.1?? Check Accept UDP requests

?????????????????????? UDP Port - 2337?????????????? Check Notify on accepted UDP requests

?????????????????????? Do not enable Secondary UDP

?? JTAlert? -????? Enable ACLog Logging

?????????????????????? Check Sending New DX Call

?????????????????????? Check Manual Configuration

?????????????????????? Enter IP4 Address of where ACLog is

?????????????????????? Enter port Number 1110

?????????????????????? Enter full PATH to ACLog including the name of the Master database - such as

????????????????????????? C:\\User\Documents\Affirmatech\ACLog\MasterLogData.mdb

?????????????????????? Click Save

??? ACLog??????? API Setting

?????????????????????? ??? Check Enable API (Server)??? Port - 1110

?????????????????????????? Check Listen for WSJTX

?????????????????????????? Click Done

?

That is all I have setup and when I make the initial contact, ACLog gets populated with Call. When I click the Log

button on the Log screen, then all the data is Logged to ACLog.

?

JoAnn/AB8YZ

?

?

On Wednesday, February 5, 2025 at 06:55:24 PM CST, Larry Banks via groups.io <larryb.w1dyj@...> wrote:

?

?

Hi Mark,

I have no problem with these working together.?? You need to read the help files to see how toset these up.

Larry / W1DYJ

On 2/5/2025 19:25, KB3Z via groups.io wrote:

I tried to get both N3FJP, WSJT-X and JTAlert to run at the same time.

But evidently that is not possible. Evidently N3FJP uses the Main Server Setting that is in WSJT. It will not identify the secondary server if activated.

Also, JTAlert will not work if one uses the Secondary Server. So I either give up automatic logging from WSJT into N3FJP or Forget JTAlert and use N3FJP and automatic logging from WSJT.

Perhaps a programming change could be done with N3FJP to allow the use of a secondary Server #.

Is that a possibility Scott?

Mark KB3Z

?