I did it into the 878 and 578 with same results. ?In the end i had to upgrade my 578 FW & CPS to the latest as it didn’t want to put it back into my radio but that was after the import error ?
?
Helping You Protect Your Family Semper Paratus, Semper Gumby
Also on MeWe??
toggle quoted message
Show quoted text
On Apr 24, 2025, at 14:27, Tom N0GSG via groups.io <twheel13@...> wrote:
?
I’m going to import the DCF into the “original” AnyTone 868 CPS (not the “extra crispy” version) to see what happens.
?
?
CAUTION: This email originated
from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
?
I did go through the CPS file and fix most of the scan and zone lists so if you want that version let me know.?
I'm going to guess if you take my 'fixed' cps, export to dcf and then re-import to CPS you'll get the same errors
?
On Thu, Apr 24, 2025 at 10:49?AM Nick AA0NM via
<nick.meacher=[email protected]> wrote:
not sure how that happened.? Here's another save of the file that opens OK.
The dcf was created from CPS before I did all the updates in the CM.
?
Nick,
?
Your DCF file is invalid. Was it generated by the CPS?
?
Tom
?
?
?
578UViiPlus? with CPS 1.2
Import to the CPS from Contact Manager is when I noticed.
It should be easy to spot but the first place I noticed is in the zones 78, 83, 85, 86, 87 94 And associated scan list
But in any of the analog zones nearby like NC I-77 you will see DMR channels as they start with letters
?
Greetings,
?
Can you send me the following information:
?
-
Model and Version of AnyTone CPS you are using;
-
Version of Contact Manager in use (hopefully the latest);
-
Steps I can take to replicate your problem. (If there’s a codeplug file involved, please share it.)
?
With this information in hand I should be able to determine what’s going wrong for you.
?
Best,
Tom
?
?
?
CAUTION: This email originated from outside of the organization. Do not click links or open attachments
unless you recognize the sender and know the content is safe.
?
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
?
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
|
I’m going to import the DCF into the “original” AnyTone 868 CPS (not the “extra crispy” version) to see what happens.
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of Nick AA0NM via groups.io
Sent: Thursday, April 24, 2025 9:53 AM
To: [email protected]
Subject: [EXTERNAL] Re: [N0GSGContactManagerSupport] Scan list corruption
?
CAUTION: This email originated
from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
?
I did go through the CPS file and fix most of the scan and zone lists so if you want that version let me know.?
I'm going to guess if you take my 'fixed' cps, export to dcf and then re-import to CPS you'll get the same errors
?
On Thu, Apr 24, 2025 at 10:49?AM Nick AA0NM via
<nick.meacher=[email protected]> wrote:
not sure how that happened.? Here's another save of the file that opens OK.
The dcf was created from CPS before I did all the updates in the CM.
?
Nick,
?
Your DCF file is invalid. Was it generated by the CPS?
?
Tom
?
?
?
578UViiPlus? with CPS 1.2
Import to the CPS from Contact Manager is when I noticed.
It should be easy to spot but the first place I noticed is in the zones 78, 83, 85, 86, 87 94 And associated scan list
But in any of the analog zones nearby like NC I-77 you will see DMR channels as they start with letters
?
Greetings,
?
Can you send me the following information:
?
-
Model and Version of AnyTone CPS you are using;
-
Version of Contact Manager in use (hopefully the latest);
-
Steps I can take to replicate your problem. (If there’s a codeplug file involved, please share it.)
?
With this information in hand I should be able to determine what’s going wrong for you.
?
Best,
Tom
?
?
?
CAUTION: This email originated from outside of the organization. Do not click links or open attachments
unless you recognize the sender and know the content is safe.
?
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
?
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
|
I did go through the CPS file and fix most of the scan and zone lists so if you want that version let me know.? I'm going to guess if you take my 'fixed' cps, export to dcf and then re-import to CPS you'll get the same errors
On Thu, Apr 24, 2025 at 10:49?AM Nick AA0NM via <nick.meacher= [email protected]> wrote: not sure how that happened.? Here's another save of the file that opens OK. The dcf was created from CPS before I did all the updates in the CM.
Nick,
?
Your DCF file is invalid. Was it generated by the CPS?
?
Tom
?
?
?
578UViiPlus? with CPS 1.2
Import to the CPS from Contact Manager is when I noticed.
It should be easy to spot but the first place I noticed is in the zones 78, 83, 85, 86, 87 94 And associated scan list
But in any of the analog zones nearby like NC I-77 you will see DMR channels as they start with letters
?
Greetings,
?
Can you send me the following information:
?
-
Model and Version of AnyTone CPS you are using;
-
Version of Contact Manager in use (hopefully the latest);
-
Steps I can take to replicate your problem. (If there’s a codeplug file involved, please share it.)
?
With this information in hand I should be able to determine what’s going wrong for you.
?
Best,
Tom
?
?
?
CAUTION: This email originated from outside of the organization. Do not click links or open attachments
unless you recognize the sender and know the content is safe.
?
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
?
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
-- Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
|
not sure how that happened.? Here's another save of the file that opens OK. The dcf was created from CPS before I did all the updates in the CM.
Nick,
?
Your DCF file is invalid. Was it generated by the CPS?
?
Tom
?
?
?
578UViiPlus? with CPS 1.2
Import to the CPS from Contact Manager is when I noticed.
It should be easy to spot but the first place I noticed is in the zones 78, 83, 85, 86, 87 94 And associated scan list
But in any of the analog zones nearby like NC I-77 you will see DMR channels as they start with letters
?
Greetings,
?
Can you send me the following information:
?
-
Model and Version of AnyTone CPS you are using;
-
Version of Contact Manager in use (hopefully the latest);
-
Steps I can take to replicate your problem. (If there’s a codeplug file involved, please share it.)
?
With this information in hand I should be able to determine what’s going wrong for you.
?
Best,
Tom
?
?
?
CAUTION: This email originated from outside of the organization. Do not click links or open attachments
unless you recognize the sender and know the content is safe.
?
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
?
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
-- Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
|
Nick,
?
Your DCF file is invalid. Was it generated by the CPS?
?
Tom
?
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of Nick AA0NM via groups.io
Sent: Tuesday, April 22, 2025 2:25 PM
To: [email protected]
Subject: Re: [N0GSGContactManagerSupport] Scan list corruption
?
578UViiPlus? with CPS 1.2
Import to the CPS from Contact Manager is when I noticed.
It should be easy to spot but the first place I noticed is in the zones 78, 83, 85, 86, 87 94 And associated scan list
But in any of the analog zones nearby like NC I-77 you will see DMR channels as they start with letters
?
Greetings,
?
Can you send me the following information:
?
-
Model and Version of AnyTone CPS you are using;
-
Version of Contact Manager in use (hopefully the latest);
-
Steps I can take to replicate your problem. (If there’s a codeplug file involved, please share it.)
?
With this information in hand I should be able to determine what’s going wrong for you.
?
Best,
Tom
?
?
?
CAUTION: This email originated from outside of the organization. Do not click links or open attachments
unless you recognize the sender and know the content is safe.
?
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
?
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
--
Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
|
578UViiPlus? with CPS 1.2 Contact Manager ver 2.8
Import to the CPS from Contact Manager is when I noticed. It should be easy to spot but the first place I noticed is in the zones 78, 83, 85, 86, 87 94 And associated scan list But in any of the analog zones nearby like NC I-77 you will see DMR channels as they start with letters
Greetings,
?
Can you send me the following information:
?
- Model and Version of AnyTone CPS you are using;
- Version of Contact Manager in use (hopefully the latest);
- Steps I can take to replicate your problem. (If there’s a codeplug file involved, please share it.)
?
With this information in hand I should be able to determine what’s going wrong for you.
?
Best,
Tom
?
?
?
CAUTION: This email originated
from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
?
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
?
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
-- Nick Meacher ?C.M. MEP ?AA0NM
717-965-5187
Semper Paratus, Semper Gumby
|
Greetings,
?
Can you send me the following information:
?
- Model and Version of AnyTone CPS you are using;
- Version of Contact Manager in use (hopefully the latest);
- Steps I can take to replicate your problem. (If there’s a codeplug file involved, please share it.)
?
With this information in hand I should be able to determine what’s going wrong for you.
?
Best,
Tom
?
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of Nick AA0NM via groups.io
Sent: Tuesday, April 22, 2025 6:48 AM
To: [email protected]
Subject: [EXTERNAL] Re: [N0GSGContactManagerSupport] Scan list corruption
?
CAUTION: This email originated
from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
?
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
?
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
|
It appears it’s an importing error.? I’ve spent the last hour going through both my 878 & 578 and it is actually both zone and scan lists that are being corrupted.? There is no pattern I can see. Some are fine and some are not. It does appear the more channels the original zone has the less likely it is to corrupt.?
I’ve used contact manager for probably close to 10 years. ?I’m not sure when this problem started as zone zones I don’t use regularly, only when tracking, and that’s when I noticed errors in the past. I’ve spent the past 2+ weeks doing a major cleanup so these errors really stood out this time. ?
?
Helping You Protect Your Family Semper Paratus, Semper Gumby
Also on MeWe??
toggle quoted message
Show quoted text
On Apr 22, 2025, at 08:02, K4dur1@... via groups.io <meshuggah70@...> wrote:
? I always made my code plugs in Excel .contact manager every time I've ever used it destroyed my code plug somehow.
Lee,
K4DUR
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
|
I always made my code plugs in Excel .contact manager every time I've ever used it destroyed my code plug somehow.
Lee,
K4DUR
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
|
OK I just loaded the latest CPS from Anytone (which lists as 1.20 but I had 1.21).
Imported the same uncorrupted file from Contact Manager and had the same result - random channels added to zones
|
As a "test" I imported the same codeplug from Contact Manager into my existing 578 CPS (ver. 1.21) and it ALSO corrupted the zone lists.? I discovered its the zone that is getting corrupted (I did the 878 2 days ago)??
Here's a sample - this is a NC DMR zone so all the channels should start NC - there doesn't seem to be a pattern for what is imported randomly.
|
UPDATED/CORRECTED? I completely rebuilt my codeplug (in Contact Manager) as I had noticed that ZONE lists were corrupted with channels being in them that were not supposed to.
I imported into the 878 CPS and noticed, when I went to add 2 new channels, that the list was again corrupted.
I checked the Contact Manager file and it was correct so this occurs during import.
A number of the scan lists in the CPS are corrupted. The easiest ones to spot are an analog scan list that has DMR channels in because of the naming conventions I use:? DMR start with 2-letter state and 2-letters for the location. Analog list the frequency.
?
This has been?an issue for some time.? ie its been occurring?for a year or more just never did an entire cleanup.
I checking the firmware and CPS I noticed that I am not current so I'll try this first but as I mentioned this has been a problem for a while so wondered if any others have experienced.
?
As a disclaimer of sorts I have around 3700 channels as the codeplug is good for about 10 states.
?
CPS 3.02
878UVii? per the settings but 878UVii Plus on the back (which is what I bought it as)
Firmware?3.01
|
Hello Dave,
?
Sorry, Radioddity models are not supported. (Anyone with an inside connection to this company is welcome to help us connect.)
?
Best,
Tom
?
?
|
Is Contact Manager able to export data in a form that can be read by Radioddity programming software?
?
-Dave, NF2G
?
|
Re: N?GSG DMR Contact Manager 2.80 Release
Hello Barry,
Contact Manager will continue to be compatible with AnyTone products as long as they support the DCF format, which is invariant regardless of format changes due to individual model updates.
The DCF idea originated with AnyTone and is a good one, however, everyone must remember that DCF files cannot track setting changes unique to specific radio models that were not originally defined in the DCF standard.
I recommend that to update digital contacts on any AnyTone model, use the updated CSV Export functionality provided in the Contact Manager DMR Online Database Searcher tool. This is a quick and very easy to accomplish this task without having to perform any codeplug edits.
Best regards, Tom N0GSG
?
Tom:
Thank you for the heads up on Contact Manager V2.8.? This is good news.
Today I was alerted on a different forum that Anytone released a new firmware update on 23 JAN 25 for the Anytone D168UV (firmware v1.05) and D878UV (v3.06 firmware). ? The posting also states that Anytone has revised the address location of the memories starting with v3.05 on the Anytone D878UV.? The posting notes that the current version of RT Systems software is not compatible with D878UV v3.05 or later. ?
Lastly, I took a look at the Anytone website??and it appears that AnyTone has also released a firmware update for the D878UV+ on the same date as well.
Consequently, any thoughts on whether Contact Manager v2.80 is compatible with the these new firmware versions? ?
Thanks,
Barry Baines, WD4ASW Keller, TX
All,
?
We have just released N?GSG DMR Contact Manager version 2.80. N0GSG DMR Contact Manager is the "goto" software for working with codeplug data in many different makes of DMR radios, including Alinco, Tera, BTECH, Connect Systems, Tytera, AnyTone, and others. It allows you to freely edit information in all supported codeplugs, and also allows you to migrate data freely between any supported radio types using copy and paste commands for individual elements (such as contacts, channels, or zones), or Structural Import for seamlessly migrating complete codeplug structures.
?
The following enhancements are included in Version 2.80:
?
- The program can now create Digital Contact CSVs for all AnyTone models. You can now update digital contacts in any AnyTone model by utilizing the DMR Online Database Searcher and clicking the "Export as CSV..." button. Contact Manager will nearly instantly compile your CSV according to the search parameters you've chosen, and in minutes you can import this CSV into the AnyTone CPS and directly port it to your radio.
- You can now configure DMR Contact Manager as the default application for opening codeplugs with the Associate DMR Files command. Once you select this, your codeplug files will appear with distinctive icons to make it easier for your to find them - - and they will open for you simply by double-clicking them.
The software now fully supports the Alinco DJ-MD40T.
- Support for all previous models, including the newer Connect Systems CS800D (Types I, II, and III), CS750 (Type I), TYT MD-2017 and MD-9600 dual band DMR radios, is included. If you've got one of these radios, use Contact Manager to build the perfect codeplug - - use Contact Manager's Structural Import feature to splice together information from your existing codeplug(s) and be on the air in minutes. Or, if you've got a new radio, migrate the codeplugs from legacy models to your new radio.
- We fixed a minor bug in the DMR database import function so that missing fields in DMR user records are now properly handled. This bug intermittently caused problems during manipulation of Digital Contact lists.
The for Contact Manager is updated and explains how to use the new features. (AnyTone, Alinco DJ-MD5 and BTECH DMR-6X2 users, please read the documentation carefully to understand how to create DCF files from the CPS for editing these codeplugs within Contact Manager.)
N0GSG Contact Manager is delivered via secured servers that are scanned daily for malware. Our site and software are 100% safe for your computer (we can make this claim only if you download Contact Manager direct from our site at ). It is well known that certain anti-virus software (including Windows Defender) is notorious for delivering false-positive reports. You may view an authoritative scan of this entire site and its content by visiting .
?
We welcome your input on this software and very much appreciate your support for the Contact Manager project.
?
PS: If you are a manufacturer or vendor of DMR radios, and would like Contact Manager to support it, !
Best,
Tom
-- Tom Wheeler
Amateur Radio Station N?GSG
Overland Park, KS
|
Re: N?GSG DMR Contact Manager 2.80 Release
Tom:
Thank you for the heads up on Contact Manager V2.8. ?This is good news.
Today I was alerted on a different forum that Anytone released a new firmware update on 23 JAN 25 for the Anytone D168UV (firmware v1.05) and D878UV (v3.06 firmware). ? The posting also states that Anytone has revised the address location of the memories starting with v3.05 on the Anytone D878UV. ?The posting notes that the current version of RT Systems software is not compatible with D878UV v3.05 or later. ?
Lastly, I took a look at the Anytone website??and it appears that AnyTone has also released a firmware update for the D878UV+ on the same date as well.
Consequently, any thoughts on whether Contact Manager v2.80 is compatible with the these new firmware versions? ?
Thanks,
Barry Baines, WD4ASW Keller, TX
toggle quoted message
Show quoted text
On Dec 31, 2024, at 16:42, Tom N0GSG via groups.io <twheel13@...> wrote:
All,
?
We have just released N?GSG DMR Contact Manager version 2.80. N0GSG DMR Contact Manager is the "goto" software for working with codeplug data in many different makes of DMR radios, including Alinco, Tera, BTECH, Connect Systems, Tytera, AnyTone, and others. It allows you to freely edit information in all supported codeplugs, and also allows you to migrate data freely between any supported radio types using copy and paste commands for individual elements (such as contacts, channels, or zones), or Structural Import for seamlessly migrating complete codeplug structures.
?
The following enhancements are included in Version 2.80:
?
- The program can now create Digital Contact CSVs for all AnyTone models. You can now update digital contacts in any AnyTone model by utilizing the DMR Online Database Searcher and clicking the "Export as CSV..." button. Contact Manager will nearly instantly compile your CSV according to the search parameters you've chosen, and in minutes you can import this CSV into the AnyTone CPS and directly port it to your radio.
- You can now configure DMR Contact Manager as the default application for opening codeplugs with the Associate DMR Files command. Once you select this, your codeplug files will appear with distinctive icons to make it easier for your to find them - - and they will open for you simply by double-clicking them.
The software now fully supports the Alinco DJ-MD40T.
- Support for all previous models, including the newer Connect Systems CS800D (Types I, II, and III), CS750 (Type I), TYT MD-2017 and MD-9600 dual band DMR radios, is included. If you've got one of these radios, use Contact Manager to build the perfect codeplug - - use Contact Manager's Structural Import feature to splice together information from your existing codeplug(s) and be on the air in minutes. Or, if you've got a new radio, migrate the codeplugs from legacy models to your new radio.
- We fixed a minor bug in the DMR database import function so that missing fields in DMR user records are now properly handled. This bug intermittently caused problems during manipulation of Digital Contact lists.
The for Contact Manager is updated and explains how to use the new features. (AnyTone, Alinco DJ-MD5 and BTECH DMR-6X2 users, please read the documentation carefully to understand how to create DCF files from the CPS for editing these codeplugs within Contact Manager.)
N0GSG Contact Manager is delivered via secured servers that are scanned daily for malware. Our site and software are 100% safe for your computer (we can make this claim only if you download Contact Manager direct from our site at ). It is well known that certain anti-virus software (including Windows Defender) is notorious for delivering false-positive reports. You may view an authoritative scan of this entire site and its content by visiting .
?
We welcome your input on this software and very much appreciate your support for the Contact Manager project.
?
PS: If you are a manufacturer or vendor of DMR radios, and would like Contact Manager to support it, !
Best,
Tom
|
N?GSG DMR Contact Manager 2.80 Release
All,
?
We have just released N?GSG DMR Contact Manager version 2.80. N0GSG DMR Contact Manager is the "goto" software for working with codeplug data in many different makes of DMR radios, including Alinco, Tera, BTECH, Connect Systems, Tytera, AnyTone, and others. It allows you to freely edit information in all supported codeplugs, and also allows you to migrate data freely between any supported radio types using copy and paste commands for individual elements (such as contacts, channels, or zones), or Structural Import for seamlessly migrating complete codeplug structures.
?
The following enhancements are included in Version 2.80:
?
- The program can now create Digital Contact CSVs for all AnyTone models. You can now update digital contacts in any AnyTone model by utilizing the DMR Online Database Searcher and clicking the "Export as CSV..." button. Contact Manager will nearly instantly compile your CSV according to the search parameters you've chosen, and in minutes you can import this CSV into the AnyTone CPS and directly port it to your radio.
- You can now configure DMR Contact Manager as the default application for opening codeplugs with the Associate DMR Files command. Once you select this, your codeplug files will appear with distinctive icons to make it easier for your to find them - - and they will open for you simply by double-clicking them.
The software now fully supports the Alinco DJ-MD40T.
- Support for all previous models, including the newer Connect Systems CS800D (Types I, II, and III), CS750 (Type I), TYT MD-2017 and MD-9600 dual band DMR radios, is included. If you've got one of these radios, use Contact Manager to build the perfect codeplug - - use Contact Manager's Structural Import feature to splice together information from your existing codeplug(s) and be on the air in minutes. Or, if you've got a new radio, migrate the codeplugs from legacy models to your new radio.
- We fixed a minor bug in the DMR database import function so that missing fields in DMR user records are now properly handled. This bug intermittently caused problems during manipulation of Digital Contact lists.
The for Contact Manager is updated and explains how to use the new features. (AnyTone, Alinco DJ-MD5 and BTECH DMR-6X2 users, please read the documentation carefully to understand how to create DCF files from the CPS for editing these codeplugs within Contact Manager.)
N0GSG Contact Manager is delivered via secured servers that are scanned daily for malware. Our site and software are 100% safe for your computer (we can make this claim only if you download Contact Manager direct from our site at ). It is well known that certain anti-virus software (including Windows Defender) is notorious for delivering false-positive reports. You may view an authoritative scan of this entire site and its content by visiting .
?
We welcome your input on this software and very much appreciate your support for the Contact Manager project.
?
PS: If you are a manufacturer or vendor of DMR radios, and would like Contact Manager to support it, !
Best,
Tom
|
AnyTone AT-D168UV CPS Bug - DCF Issue
All,
?
FYI - I've entered a ticket with AnyTone to correct the CPS (1.04) for this model. It writes defective DCF files and fails to read properly-formatted DCFs. Once this issue is corrected, Contact Manager will automatically support this new model.
?
73,
Tom
?
|
Mark - Be sure to update to the latest AnyTone CPS. AnyTone struggled with getting DCF files right on earlier CPS versions. You will probably need to update your radio's firmware at the same time.
73,
Tom
?
|
I cannot get the DCF file I created to open in Contact manager. I am using 868 software 1.39.?
?
Any help would be appreciated. It says file is corrupt
?
Thanks
Mark
|
