开云体育

Hello Dave, Sorry, Radioddity models are not supported. (Anyone with an inside connection to this company is welcome to help us connect.) Best, Tom

Is Contact Manager able to export data in a form that can be read by Radioddity programming software? -Dave, NF2G

Hello Barry, Contact Manager will continue to be compatible with AnyTone products as long as they support the DCF format, which is invariant regardless of format changes due to individual model

Tom: Thank you for the heads up on Contact Manager V2.8. This is good news. Today I was alerted on a different forum that Anytone released a new firmware update on 23 JAN 25 for the Anytone D168UV

All, We have just released *N?GSG DMR Contact Manager version 2.80*. N0GSG DMR Contact Manager is the "goto" software for working with codeplug data in many different makes of DMR radios, including

All, FYI - I've entered a ticket with AnyTone to correct the CPS (1.04) for this model. It writes defective DCF files and fails to read properly-formatted DCFs. Once this issue is corrected, Contact

Mark - Be sure to update to the latest AnyTone CPS. AnyTone struggled with getting DCF files right on earlier CPS versions. You will probably need to update your radio's firmware at the same

I cannot get the DCF file I created to open in Contact manager. I am using 868 software 1.39. Any help would be appreciated. It says file is corrupt Thanks Mark

Tom, Sure thing. Codeplug attached. -Mike K0NGA

Hello Mike, Can you attach a copy of the offending file? I'll take a look at what's going on. Tom

All, I'm using version 2.70 of the Contact Mananger to attempt to open a file I saved using version 1.59 of the Tera DMR CPS. When I attempt to open that file, Contact Manager gives me the error:

All, If you have an Alinco DJ-MD5FXT, you should be able to use Contact Manager to work with your codeplugs, but alas, there is a CPS bug. This model (and its CPS) come from Anytone. The CPS "About"

Thanks Nick

Try using N0GSG’s contact manager works with most CPS and certainly the 800’s. It’s free and makes programming SO much easier For the repeaters you can’t hear make sure you do not have a PL

Hi Tom, I started with the simple stuff. I programmed some local VHF and UHF repeaters. A couple worked fine, and a couple did not; I could see the signal reception icon, but no audio. I rebooted,

I’d suggest reaching out to Jerry at Connect System's. Call they always answer in person and are very helpful. I like the idea of the new 800D Plus. I had the 800D years ago but now went the way on

Hi, Thanks for your help. I ordered a CS800 and they shipped a CS800D Plus. I have spent a good 8 hours trying to program and probably that much time researching, and have a number of problems. I

I’ve successfully used CM with my CS800D PLUS before, but never tried to import the entire user contact list. Just tried, and worked perfectly… Tom W4KX Sent: Saturday, January 21, 2023

Hello Doug, Contact Manager SHOULD support this radio. There have been many firmware revisions and codeplug format changes. Please give it a try and report back to us. (I have a CS800D that's several

Hello All Will Contact Manager work with the 800D Plus? ?I received the radio yesterday and am starting to program it and saw Contact Manager and would like to use it. Thanks Doug N8FRJ