Re: Contact Manager imports incorrect DMR ID's from CSV file.
Hi Geep!
I had a similar issue when I upgraded the firmware. ?I had to export the existing code plug with the utility in the CPS for the extended zone channels. ?Then I updated the firmware and the CPS version afterwards. I then followed the sequence reported here:
All seemed to work okay afterwards. ?However, ?I continued to have issues with Contact Manager. ?I ended up using this site for the contacts and all worked fine:
Attached is an updated CS800D contact file I pulled down today.
Hope this was helpful
Ted
KD4EG
From: [email protected] <[email protected]> on behalf of Gordon P. Howell, Jr. <geep@...>
Sent: Thursday, April 9, 2020 2:06 PM
To: [email protected] <[email protected]>
Subject: Re: [N0GSGContactManagerSupport] Contact Manager imports incorrect DMR ID's from CSV file
Sent: Thursday, April 9, 2020 2:06 PM
To: [email protected] <[email protected]>
Subject: Re: [N0GSGContactManagerSupport] Contact Manager imports incorrect DMR ID's from CSV file
?
I am not griping, just reporting what happened when I tried to solve a problem with the CS800D CPS.? Which is still not solved.? I looked before I posted, but the old group is gone, and this group has very few posts, so I thought I would just throw it
out there.? I don't do a lot of re-programming and can usually do what I need to do in the CPS, but it has an issue that makes a contact import impossible.?
When Tom checks this group, then I'm sure he will see what I posted, and provide an answer.? I figured out a workaround and posted it.? And I have supported his work in the past.? I appreciate what he has done, but I am surprised that other CS800D users have not noted this problem, or if they have and there's an approved workaround, it can't be found with the current resources available.
Geep
When Tom checks this group, then I'm sure he will see what I posted, and provide an answer.? I figured out a workaround and posted it.? And I have supported his work in the past.? I appreciate what he has done, but I am surprised that other CS800D users have not noted this problem, or if they have and there's an approved workaround, it can't be found with the current resources available.
Geep