开云体育

The very earlyModIO manual or board diagram had an error on the RS485 connection. This is possibly your problem. I don't remember the details, so I can't give them. I have a Modio talking to Homann

Hello all- I have been using my ModIO for a year or so and it has been working well. I find that I am now in need of more IO so I bough another ModIO last month with the intent of using it with the

Hi Jason, The version of the ModIO or the firmware should have no effect on using the ModIO for a pendant. Have you tuned the MPG under the Config tab in Mach3? That needs to be

I have a ver 2.2 ModIO that I got a long time ago and now I am back into CNC and getting it up and going. I have it configured as default ModIO and talking to Mach3 (latest version). Everything

their where some post previous about the the plugin from john prentice not working did you get a fit for this fault. i have had a look throught the forum but i cant see a fix for it . is their a

I need to create a brain to do the following. 1.) Activate relay one (on output 5 in modbus) until feed rate DRO = 20 (I mapped analog input one to feed rate DRO) 2.) Activate relay two (on output 6

Hello Gerald, It looks like I'm a bit late on this. However the code goes in what is called a macropump. It is aptly named as it runs a macro continuosly (if it's built right ) The VB script is

I used a unique mixture of analog and brains to get everything talking the way I wanted it to. I will say that VB script running in Mach 3 seems to be somewhat glitchy. Another thing about the VB

First, glad to see Peter is monitoring this board, must have watched the modio video 50 times already! 1.) I have a 12v linear actuator and would like to run it is as the z axis using modio. To

Hi Rod, Thanks for the input. Cheers, Peter. Rocket wrote:

Hi Gerald, When setting up Modbus in Mach3 there are 2 different ways to do it. 1. Legacy Modbus I/F 2. Plugin Support Modbus I/F The legacy interface was the original modbus interface written in

Hi, Yes, I agree with Lee. A resistive network is the best use of the ModIO' inputs. On the subject of multiple ModIOs, there is no issue with the ModIO's being able to do this. The Plugin when

Hi Gerald, I did a step by step on Peter’s ModIO for a console connected to Mach3. The instructions are probably a little basic for your level but if you skip over the simple bits the connections

Hi Lee and thanks for the reply. Appreciate your comments. I suspected the analog route would be the best way to go and is easy enough to build up. I have no problems with the hardware side of

My advice would be analog with a resistive ladder. For more inputs u should be able to connect the modios together in a daisy chain. If Peter is listeneing he was going to check into this over a year

Hi All, I am new to the group but not to MACH or CNC. I am finally getting around to trying out my MODIO pcbs that I purchased some time back. The prompt was I purchased a cheap MPG pendant off of

Hello All, For the past while now we have been working on developing a new company. Due to the recession that has hit our Patternmaking business pretty hard, we have decided to focus on helping the

Hi all, Over the last 12 months (or longer), I've been working on the ModIP. The ModIP is a Modbus slave on steroids. Firstly it connects to Mach3 via Ethernet, hence the IP in ModIP. It uses Modbus

Hello Peter The problem whit the display is solve I have buy me a new one and now I got the start up display and the second one. But I have put in the plug in on Mach3 MP-03v2-1 But I got the

Hi Brian, The best thing to do is have a look at some of the customisation and ModIO examples in the Mach3