开云体育

I think that is wrong....Mic Scharf? ...27k goes from pin 2 to ground pin 1....pin 3 goes to plus on capsule...pin 2 goes to minus on capsule...Thats how all mine our wired and work good....

Hey Joe, the theory goes like this: the signal to each microphone is correlated. For two capsules the signal adds by 6dB. But the noise is not correlated so it adds by 3dB. You have to keep doubling

I've read that an advantage of a cluster of capsules is a decrease in noise (or is it just increased S:N?).? If lower, why? Can the array's noise be lower than that of a single capsule of that model?

If they don’t work out you can always bust out your soldering iron ? Best Regards, Jules Ryckebusch

I just wanted to thank everyone who responded. I have settled on a pair of AT4041 mics and have placed an order. Fingers crossed I'm happy with the results! Thanks again! 73 Eugene W2HX Subscribe to

How I see it: Resistor is from pin 1 to pin 3, pin3 to negative on capsule and plus on capsule to pin 2

Go for the SSM2019 it is really good. that corp makes really good ones too Best Regards, Jules Ryckebusch

Yes it is Jules.....By the way got money back on those ssm2017 chips from china....Going to build some pres with the s9015 pnp pairs shortly...

Isn’t fun to build a Mic that surprises you with how good it is? Best Regards, Jules Ryckebusch

Cheers dude. I'm sure my noisy drummer mates neighbours will hate you for this ?

Look up nordicaudiolabs on you tube for schematic.....Works with all mic pres or mixers that are not transformer coupled on input....Never heard better cymbals and hi hats with any other mics i ever

I put some in a xlr conn stuck out and wrapped the end with thick screen...They are uni so need back exposed...The schematic is floating around on you tube and has one 27k resistor from pin 2 on xlr

How have you mounted them?

Oooh interested in this, have two very good friends who are drummers and general musos.. I'm more about nature sounds and general sound design. When you mention the schematic, I assume you are

Bought 8 of these ...Wired up and put on my drum overheads and was impressed ...Noticed a clarity I didnt get with Octava O12s or My AKG 451s with CK-1 capsules...Or My MXL 603s mics...S/N is at 69db

Yes dis network.. I am fairly certain they are parabolic or at least close. I made one into a sun reflector once and it easily focused the sunlight into and area about the size of a ping pong ball. I

Do you mean the Dish network? Do you know if those are actually parabolic?

old satellite dish from dish...Sent using Zoho Mail ---- On Mon,13 Nov 2023 13:05:09 -0500 fotoralf@... wrote ----Am 13.11.23 um 10:46 schrieb cx b: Metal or plastic lamp shades. Ralf -- Ralf R.

In the past, getting old used satellite dishes was the way, but with modern beamforming they aren't always parabolic anymore and so aren't as common these days, not necessarily cheap, etc. If you have

Thanks Jules...Lesson learned.....