开云体育

I’m working to have Micboosters in the UK carry them but ut us work in progress. They do have the TSB2555 capsules Best Regards, Jules Ryckebusch

Hi Jules Did you know any easy way/alternative to buy from JLI electronics in Europe and not being "killed" by a massive "customs fee" after also paying a big Shipping cost? Thanks!

Gavin, yea you can. I did it here: https://youtu.be/uJqkP5O-hAw Best Regards, Jules Ryckebusch

Hey guys, I happen to have three of those 2555 capsules sitting on my desk, and a mid/side project sounds interesting. Can you save space by using the dual-channel Alice:

Matt, BTW are you the maker of the recordinghacks website? I use that website for every single mic look up! Its full over very useful info!

Thank you Matt! This means a lot to me. This makes a lot of since as well. As I journey down the road of mics, I am finding out a bunch of new stuff! I been doing a lot of research of parts and such

The rear side of every Braunmuhl-Weber style (dual diaphragm, large diameter) capsule, including the K47 and CK12 styles, is part of the sound of the front side. If you were to change the rear side of

Hi everyone, I love the sonic differences in both capsules the k12 and k47. To me the k12 lows just seem fuller but the k47 has better highs. This is just from my experience of putting k12 capsule in

I read over everything! YES This is what I was looking for. Thanks to all the hard work being put into this! Looks like I can buy a completed board set from here according to the website Mic Scharf

22nF I know they are big you could go down to 10nF but at 22nF with the output impedance of the OPA board you are 3dB down at about 150Khz. This makes it bullet proof. I have had no issues and build

I have a question regarding the EMI/RF suppression caps. On this page: https://www.instructables.com/OPA-Based-Alice-Microphones-a-Cardioid-and-a-Figur/ the value is .22nF (220pF) and here 22nF. That

Thank you Mic Scharf! I will work on reading through the info! Best Regards, Jesse

Great stuff mentioned so far here. This one caused me a lot of concertation initially as well. There is no internal FET so a lot of the data sheet looks like "copy and paste" maybe it is a great

Sadly, the 2555 data sheet you link to is mostly nonsense.? This capsule is a FETless electret, and the data sheet has details of the characteristics of the impedance converter shown in the schematic

That capsule is an electret. It needs no polarizing voltage. Regarding “lowest self noise,” you might end up considering a larger capsule. Capsule self-noise is inversely proportional to active

True Condenser OPA Mics : 6 Steps (with Pictures) - Instructables ( https://www.instructables.com/True-Condenser-OPA-Mics/ )

OPIC Mid/Side mic (jp137.com) ( https://www.opic.jp137.com/index-ms.html )

Hello! Back in the mic making game and working on a Mid-Side setup! Anyways, I bought several TSB2555 capsules and looking at the datasheet it says the operating voltage is 1-10V (

Hi everyone, I am new to this forum. I found it after reading a lot of info about building a microphone. What I would like to know is where to get parts and a donor mic shell in order to build a

OK, good to know, Bill, thanks. I was just going by the comparison table on their Web site. I'm not a big fan of being tethered to an online account, but your description doesn't sound too onerous.