Le 19/12/2024 à 03:12, kandoit7 via groups.io a écrit?:
Thank you, Jerry.
I have one question:
When connecting the load resistor here, should it be connected between Pin 2 and Pin 3 of the XLR?
Yes. The output is between pins 2 an 3. that's where it should be loaded.
Or should two resistors be connected separately, one between Pin 2 and ground, and the other between Pin 3 and ground?
No.
From what I’ve thought, it seems like the latter is correct, but I wanted to ask if my understanding is wrong.
If we consider it as a load on the output, I think it would be sufficient to connect a resistor between Pin 2 and ground to measure the output.
Then you'd be wrong.
