Still problem w/ Pulse Frequency

bartelian

I just downloaded Mach2Mill and tried to configure it. The manual
 says I should have about 24,600 Hz. My Puse Frequency starts high
 but goes down to 1100-1200 Hz., the program will keep running (very
 slowly) until the screen saver kicks in. Then when I hit a key to
 return to the regular screen the P/Freq will go up to 25,500 Hz for
 about 15 sec and then drop dramatically low again. I cannot
maintain
 a consistant Pulse Freq. over about 1300 Hz.

 I am running M2M Release 1.90 on a Compaq 2.6GHz, 512 Mb. So far I
 checked to make sure Quicktime (Qtask.exe) is not installed, made
 sure LAN is set to 100Mbps, disabled the screensaver, cleaned the
 system with SpyBot, and started with a clean boot. So far nothing
 works.

 Thanks in advance for any help. The Program is just what I want,
but
 don't know if it will work on my computer. Bill B

Robert W Williams

#7263

I would start in your services app and shutdown any services that are not
necessary.  Possibly change from automatic to manual for those services that
can be changed.  It sounds as if some apps are running in the back ground.
Are you connected to a network, if not such down those services with network
involvement.

Show quoted text

-----Original Message-----
From: bartelian [mailto:bartelian@...]
Sent: Monday, March 01, 2004 10:56 AM
To: mach1mach2cnc@...
Subject: [mach1mach2cnc] Still problem w/ Pulse Frequency

I just downloaded Mach2Mill and tried to configure it. The manual
says I should have about 24,600 Hz. My Puse Frequency starts high
but goes down to 1100-1200 Hz., the program will keep running (very
slowly) until the screen saver kicks in. Then when I hit a key to
return to the regular screen the P/Freq will go up to 25,500 Hz for
about 15 sec and then drop dramatically low again. I cannot
maintain
a consistant Pulse Freq. over about 1300 Hz.

I am running M2M Release 1.90 on a Compaq 2.6GHz, 512 Mb. So far I
checked to make sure Quicktime (Qtask.exe) is not installed, made
sure LAN is set to 100Mbps, disabled the screensaver, cleaned the
system with SpyBot, and started with a clean boot. So far nothing
works.

Thanks in advance for any help. The Program is just what I want,
but
don't know if it will work on my computer. Bill B

Yahoo! Groups Sponsor	

ADVERTISEMENT

Click HereClick Here 

<
/S=:HM/A=2019528/rand=763117604> 	

  _____  

Yahoo! Groups Links

*	To visit your group on the web, go to:

<> 

*	To unsubscribe from this group, send an email to:
mach1mach2cnc-unsubscribe@...
<mailto:mach1mach2cnc-unsubscribe@...?subject=Unsubscribe> 

*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<> .

Art

#7264

Hi Bill:

  Sounds like some driver or application is shutting down the timer. I would
do a msconfig from the run button and uncheck everything in the startup tab.
Then try again. If all else fails, reinstall Windows on top of itself at
that point, it sometimes helps...

Art
www.artofcnc.ca

#7225

You may need to try the special driver. I believe there is a .BAT file that
will install it.
Jim

Show quoted text

----- Original Message -----
From: "bartelian" <bartelian@...>
To: <mach1mach2cnc@...>
Sent: Monday, March 01, 2004 9:56 AM
Subject: [mach1mach2cnc] Still problem w/ Pulse Frequency

I just downloaded Mach2Mill and tried to configure it. The manual
 says I should have about 24,600 Hz. My Puse Frequency starts high
 but goes down to 1100-1200 Hz., the program will keep running (very
 slowly) until the screen saver kicks in. Then when I hit a key to
 return to the regular screen the P/Freq will go up to 25,500 Hz for
 about 15 sec and then drop dramatically low again. I cannot
maintain
 a consistant Pulse Freq. over about 1300 Hz.

 I am running M2M Release 1.90 on a Compaq 2.6GHz, 512 Mb. So far I
 checked to make sure Quicktime (Qtask.exe) is not installed, made
 sure LAN is set to 100Mbps, disabled the screensaver, cleaned the
 system with SpyBot, and started with a clean boot. So far nothing
 works.

 Thanks in advance for any help. The Program is just what I want,
but
 don't know if it will work on my computer. Bill B

Yahoo! Groups Links

开云体育

Still problem w/ Pulse Frequency