开云体育

Hi,i am having a problem with the feedrate overide in mach 2,seems as
something is holding it back,when i ajust the override nothing
changes,can anyone give me quick idea where to correct this,I`ve been
at it all day and still can`t the get the speed up,jog speeds are
fine,g-codes are fine.
Thanks
Scot
UK

Scott:

Is your program written with G1 moves? OverRide will not override a G0
move.

Thanks,
Art
www.artofcnc.ca

Art: my codes are written with G1,I have noticed that
if i use a smoother raster to vector conversion the
speeds will increase with no problem,it seems to me
that there are to many codes for so little axis
movement,it is as like consatnt velocity is off,if i
draw a simple square in cad,i can execute it as fast
as i like,must be the g code conversion.I will run
mach 1 tommorow and try the same codes on there.
Scot
--- Art <fenerty@...> wrote:

Scott:

Is your program written with G1 moves? OverRide
will not override a G0
move.

Thanks,
Art
www.artofcnc.ca

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software