开云体育

evening, i was wondering if mach1 / 2 is able to be interfaced to potentiometers for controlling feed rates and bounceless switches for controlling jog increments as well as axis selection. this

Welcome back, how long were you gone two months? Seemed that long without our leader. Leader?, I think I'm more of a building "super" who fixes pipes when the residents keep banging them to get

Murky indeed... Macro's were originally designed so I could reuse code, but they didn't work out that way. Instead they are used to create usefrull subroutines for specific purposes. Doc's are a

Hi John, I am just trying to find if you can issue simple g-code instructions and pile them in a macro, I would like to take standard gcode files and install calls for a m50 macro and have this

Hi, Does the thc function alter the initial 0 z height, if I set my 0,0,0 and start the file my torch raise 1" rapids to the pierce point and the thc starts, when I call my next g0 z1 do I return

I'm a little confused on the wiring of my Rutex drives. Perhaps someone can help? There is a line "stepper/spi" what is it for? and "ERR/DOUT" what is this one for? and last, the step and

Robert, To get your drive going, don't worry about Stepper/spi or Err/Dout - these are used when you're trying to interface it to a PC for changing parameters using the test software. You should

About the ground again. The step and direction are from the computer. The auxiliary supply is isolated from the pc. The step and direction lines can not get to the ground on the auxiliary supply

Would and could macros contain what may better be called a tool kit similar to what the fellow who has GenGcode group is developing. If so I feel that would be worthwhile. Bob

Sorry, I didnt mean any offense, just needed to de-murkify my self:-) That's very useful, is it mentioned in the docs and I missed it? -Lee --- In mach1mach2cnc@..., Art <fenerty@a...>

I guess its not really as important as I used to think, the current activation signals are really all that are required most of the time. I was interested in macros to create custom M commands to

<indigo_red@q...> wrote: self:-) Lee GCode Lee I am sure no offence has been taken. The function to execute G-code is documented in manual revision A2 - sadly this is of little use to you as

Hi: I'm not fully back yet, but thought I would add a note on the SPI/Dout rutex lines. I am adding capability to read those lines and do a tuneup test from Mach2 on those linesl. Both Rutex and

Art. That sounds great, when do you think I will be able to tune the rutex through mach2? It might be faster than me getting an old windows computer together. About the ride, glad you had a safe

Bob: Started from Halifax, crossed NS then ferried to NFLD, and drove to Gros Morne national park. Great place. I got lucky, no rain for 7 days..very hot as well which is not normal for

Hi Art - can you also look at spindle & coolant toggles - sometimes spindle fails to switch on - no LED and pin is not toggled. It seems to happen more if you toggle coolant on first. A long

Hello Art. Nice to see you again. I can't get the override input working. Nothing, the led is not working in the diagnostic panel. Could you check it ? Thanks, Olivier.

wrote: with PM why It's not so much that it won't work, it's more that it may not work well for a motor speed control of any precis

point is The THC simple keeps the Z updated with the actual height. If you have it on and start cutting, let's say at .125 above the material and the THC moves the head up and down during the

Now that has made my day!. Excellent news Art. I presume that means configuring the drive via SPI will be available? (eg, setting the encoder division ratio)