On Tue, 26 Aug 2003 12:35:31 -0300, you wrote:
What seems to happen is on hitting the first g32 line, the motor is
switched on momentarily and then off
Which motor, you mean the spindle motor???? The motor should be running
and up to speed when the G32 is called. Or do you mean the Z motor starts
and then stops?
Yes - spindle motor is stopping!
Here's the relevant lines, the next lot just increment X
N130 M6 T2
N140 G43 H2
N150 G0 X9.73 Z36.386 S500 M4 M8
N160 G0 X7.191 Z34.978
N170 G32 X7.191 Z19.698 F1.0
N180 G0 X9.73 Z19.698
N190 G0 X9.73 Z36.386
N200 G0 X7.151 Z34.956
--
Steve Blackmore
