On Wed, 22 Oct 2003 19:45:36 -0300, you wrote:
I have recoded the Safe_Z routines so they are OFF in Mach2Turn, I have
also changes the macro's so that Lathe has its own. I am still tracking down
the Macro init parser error. It seems to be related to errors which may
occur (Feedrate or others) while the program is simulating to draw itself.
Thanks Art - The more I think about it the better Safe_X sounds, done
the same as mill as a persistent entry box would give you the chance
of setting the distance or having it turned off, as conditions allow.
Nobody else seems to have commented on this one, so I assume it must
be acceptable :)
Could you get your machine to error with that file? It does indeed
seem to be linked to toolchanges and feedrates, the more there is, the
more errors I get, the critical number of errors for me is 4 - any
more and OCX crashes.
From event log it's always
Faulting application mach2.exe, version 1.0.0.1, faulting module
mach1ocx.ocx, version 1.0.0.1, fault address 0x00035422.
--
Steve Blackmore
