Ok.? Bring up the device manager and see if the aeduino shows up as a serial port or under USB devices as unknown.
If unknown you can try installing the Arduino IDE which will likely install the proper device driver.
toggle quoted message
Show quoted text
-------- Original message --------
From: "c.bellee" <c.bellee@...>
Date: 2023-03-12 12:26 p.m. (GMT-08:00)
Subject: Re: [MachCNC] Mach3 Modbus/Win10 problem
This is just a USB arduino connection...
Le 12/03/2023 à 18:33, John Dammeyer a
écrit?:
How
are you connecting to the MODBus?? A USB dongle that acts
as a serial port or a physical serial port?
After
WIN-7 Microsoft disallowed most USB PID combinations unless
the owners paid $5k or so for the right to have their
configuration approved.
?
?
Hi,
Trying to move my Mach3/Ess from Win XP to Win10, I get an
"Error triggered" "Art Code 1" and "Art Code 9991" at the
startup.
If I create a new profile by cloning my working profile,
everything works fine the first start (even the Modbus
logic) but the second time I get the error again.
If I uncheck "Modbus InputOutput Support" before Exiting
evrything works as normal the next Start.
I reinstalled everything from scratch but still the same, seems to be a Modbus/Win10
problem...
Mach version is : 3.043.062
Any idea ?
Thanks.
Chris
